{"product_id":"anvil-0300045341-black-cast-iron-tee-reducer-class-125","title":"Anvil 0300045341 Black Cast Iron Tee Reducer Class 125","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ANVIL 0300045341 is a black cast iron threaded tee reducer designed for use in piping systems where a branch reduction is required within a tee configuration. Sized at 1-1\/2 x 1\/2 x 1-1\/2 inches with female pipe thread (FPT) connections on all ports using NPT threading, this fitting meets Class 125 pressure ratings for liquid and gas service up to 125 psi. It carries ASME B1.20.1 and ASME B16.3 dimensional standards, ASTM A-197 material compliance, FM Approval, and cULus Listing. Licensed plumbers and pipefitters install this fitting in fire protection, gas distribution, and general-purpose piping applications.\u003c\/p\u003e\n\u003cp\u003eThis reducer tee is suited for residential and commercial piping installations where a main run must continue at the same diameter while a smaller branch line is tapped off. The 1-1\/2 inch run ports and 1\/2 inch branch port make it a common choice for gas branch lines, hydronic heating distribution headers, and fire suppression system branch drops. All connections are threaded FPT per NPT standards, compatible with standard black iron pipe and fittings of the same class.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCast iron construction with black finish for corrosion resistance in typical piping environments\u003c\/li\u003e\n  \u003cli\u003eClass 125 rated to 125 psi for liquid and gas service\u003c\/li\u003e\n  \u003cli\u003eFPT connections on all three ports with NPT threading for standard pipe compatibility\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B1.20.1 and ASME B16.3 dimensional standards\u003c\/li\u003e\n  \u003cli\u003eASTM A-197 malleable cast iron material compliance\u003c\/li\u003e\n  \u003cli\u003eFM Approved and cULus Listed for use in fire protection and other regulated systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style threaded fitting compatible with Class 125 black iron pipe systems using NPT threaded connections in sizes 1-1\/2 inch run by 1\/2 inch branch by 1-1\/2 inch run.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or pipefitter in accordance with applicable local codes and IFGC or IPC requirements. Shut off and depressurize the piping system completely before removing or installing any threaded fittings. Apply appropriate thread sealant or PTFE tape to male threads before assembly. Do not overtighten threaded connections, as cast iron fittings can crack under excessive torque.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Reducer Tee\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Size\u003c\/strong\u003e: 1-1\/2 x 1\/2 x 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePressure Rating\u003c\/strong\u003e: 125 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClassification\u003c\/strong\u003e: Class 125\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 3.63 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 3.63 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 3.63 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.14 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASME B1.20.1, ASME B16.3, ASTM A-197, FM Approved, cULus Listed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ANVIL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 0300045341\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ASC ENGINEERED SOLUTIONS","offers":[{"title":"Default Title","offer_id":51696831660338,"sku":"0300045341","price":51.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d9a82b04428fe135760bb7a2b638c2f6_97e97932-5696-41c5-b814-5b59db2f24e9.jpg?v=1788346788","url":"https:\/\/voomisupply.com\/products\/anvil-0300045341-black-cast-iron-tee-reducer-class-125","provider":"Voomi Supply","version":"1.0","type":"link"}