{"product_id":"ansell-11537100-cut-resistant-gloves-xl-ansi-a2-foam-nitrile","title":"Ansell 11537100 Cut Resistant Gloves Xl Ansi A2 Foam Nitrile","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ANSELL 11537100 is a cut-, puncture-, and abrasion-resistant work glove from the 11-537 Series, designed for industrial and trade environments where hand protection from sharp edges, puncture hazards, and rough surfaces is a daily requirement. The glove shell is constructed from 18-gauge HPPE, fiberglass, nylon, and spandex for a lightweight, form-fitting build. The palm, fingers, and knuckles are finished with a foam nitrile 3\/4-dip coating that delivers a reliable grip on both dry and lightly oily surfaces. At 10.25 inches overall length, the glove covers the hand and wrist adequately for most bench and assembly tasks. Rated ANSI Cut A2, ANSI Puncture 4, and ANSI Abrasion 4, these gloves meet common jobsite PPE requirements for moderate-hazard work. The silicone-free construction makes them suitable in environments where silicone contamination is a concern.\u003c\/p\u003e\u003cp\u003eThese gloves are intended for use in light industrial, HVAC, electrical, plumbing, and general mechanical service applications where workers handle sheet metal, conduit, pipe fittings, or other components with cut and puncture risk. The seamless lining construction reduces interior seam pressure points during extended wear, making them appropriate for full-shift use. The static-dissipative property makes them a reasonable choice in environments where electrostatic discharge control is required. The unisex sizing covers XL for men and L for women. The foam nitrile grip surface performs on irregular, textured, and dry material surfaces common in trade work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eANSI\/ISEA Cut Resistance Level A2 for protection against moderate cut hazards including sheet metal edges and conduit burrs\u003c\/li\u003e\n\u003cli\u003eANSI\/ISEA Puncture Resistance Level 4 for resistance to sharp wire ends, fasteners, and pointed fittings\u003c\/li\u003e\n\u003cli\u003eANSI\/ISEA Abrasion Resistance Level 4 for durability against rough surfaces and repeated contact wear\u003c\/li\u003e\n\u003cli\u003eFoam nitrile 3\/4-dip coating on palm, fingers, and knuckles provides grip retention on dry and lightly textured surfaces\u003c\/li\u003e\n\u003cli\u003e18-gauge HPPE and fiberglass knit shell with seamless lining for lightweight, all-day comfort\u003c\/li\u003e\n\u003cli\u003eStatic-dissipative construction suitable for ESD-sensitive work areas\u003c\/li\u003e\n\u003cli\u003eSilicone-free materials for use in silicone-sensitive production or service environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose cut-resistant work glove for trade and light industrial applications. No specific equipment or system compatibility is stated by the manufacturer for this SKU.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThese gloves are worn PPE and do not require mechanical installation. Inspect each glove prior to use for tears, punctures, or degraded coating that could reduce protection. Replace immediately if the foam nitrile coating shows significant cracking, peeling, or separation from the shell. Consult applicable OSHA hand protection requirements and your site safety program to confirm this glove rating meets the hazard assessment for your specific task.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Cut Resistance Level\u003c\/strong\u003e: A2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Puncture Resistance Level\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANSI\/ISEA Abrasion Resistance Level\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEN 388 Rating\u003c\/strong\u003e: 4X42B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Material\u003c\/strong\u003e: Foam Nitrile\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Coverage\u003c\/strong\u003e: 3\/4 Dip, Palm, Fingers, and Knuckles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShell Material\u003c\/strong\u003e: HPPE, Fiberglass, Nylon, Spandex (18-Gauge Knit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLining\u003c\/strong\u003e: Seamless HPPE, Fiberglass, Nylon, Spandex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff Style\u003c\/strong\u003e: Knit, Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuff Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 10.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black with Gray Cuff\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: XL (Mens), L (Womens)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand\u003c\/strong\u003e: Pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatic Dissipative\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone-Free\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA Approved\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlood Borne Pathogen Barrier\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\/ISEA, EN ISO 21420:2020, Ecovadis 2022\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 pair per package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ANSELL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 11537100\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ANSELL","offers":[{"title":"Default Title","offer_id":51541157970226,"sku":"11537100","price":31.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2e7344e4512d53d1c22de06059dd2e77_ff25f900-9d1e-4d44-877d-7421413d28e0.jpg?v=1785869187","url":"https:\/\/voomisupply.com\/products\/ansell-11537100-cut-resistant-gloves-xl-ansi-a2-foam-nitrile","provider":"Voomi Supply","version":"1.0","type":"link"}