{"product_id":"anderson-metals-754048-0806-brass-flare-connector-1-2-in","title":"Anderson Metals 754048-0806 Brass Flare Connector 1\/2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ANDERSON METALS 754048-0806 is a lead-free brass flared tube connector designed for use in gas, fuel, or fluid distribution lines where a secure, leak-resistant mechanical joint is required. It features a 45-degree flare end on one side and a male NPT threaded end on the other, making it a standard Flare x MNPT transition fitting. The tube OD is 1\/2 inch and the male thread is 3\/8 inch NPT. Rated at 750 psi maximum working pressure for both static and dynamic conditions, this connector is suited for applications where pressure integrity and material compliance matter. Licensed plumbers and pipefitters are the typical installers for this type of fitting.\u003c\/p\u003e\n\u003cp\u003eThis fitting is used in residential and light commercial plumbing, HVAC refrigerant line transitions, propane and natural gas distribution, and hydraulic or pneumatic tubing assemblies where a 45-degree flare seat is specified. It is commonly installed at appliance connections, manifolds, and line-set terminations that require an NPT port on the mating component. The lead-free brass construction makes it suitable for potable water applications where lead-free material compliance is required by code.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLead-free brass construction meets lead-free compliance requirements for potable water systems\u003c\/li\u003e\n  \u003cli\u003e45-degree flare seat provides a metal-to-metal seal without additional sealant on the flare side\u003c\/li\u003e\n  \u003cli\u003eFlare x MNPT end configuration transitions between flared tubing and NPT-threaded ports\u003c\/li\u003e\n  \u003cli\u003e750 psi maximum working pressure rated for both static and dynamic service\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch tube OD flare end with 3\/8 inch male NPT thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard Flare x MNPT connector compatible with 1\/2 inch OD tubing prepared to a 45-degree flare seat and any 3\/8 inch NPT female-ported component or valve body.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber or gas fitter. Shut off and depressurize the line before disassembly or fitting installation. The flare seat requires properly flared tubing using a calibrated 45-degree flaring tool — do not use pipe dope or thread sealant on the flare cone itself. Apply thread sealant or PTFE tape to the male NPT threads only, following applicable IPC or IFGC requirements for the service type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Lead-Free Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Working Pressure (Static)\u003c\/strong\u003e: 750 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Working Pressure (Dynamic)\u003c\/strong\u003e: 750 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.11 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ANDERSON METALS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 754048-0806\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ANDERSON METALS","offers":[{"title":"Default Title","offer_id":51694079967538,"sku":"754048-0806","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4df27dcb4a8544ea3731c535fd28c9d6_6522348a-110c-443c-95ef-9818560327b9.jpg?v=1788319960","url":"https:\/\/voomisupply.com\/products\/anderson-metals-754048-0806-brass-flare-connector-1-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}