{"product_id":"anderson-metals-754046-0808-brass-flare-connector-1-2-in","title":"Anderson Metals 754046-0808 Brass Flare Connector 1\/2 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ANDERSON METALS 754046-0808 is a lead-free brass flared tube connector designed to join 1\/2-inch OD tubing to a 1\/2-inch female NPT port using a 45-degree flare connection. The flare x FNPT end configuration makes it a direct, no-solder solution for gas, refrigerant, and fluid piping systems where a mechanical flare joint is required. Rated at 750 psi for both static and dynamic working pressure, this fitting is built for demanding service conditions. Plumbers, HVAC technicians, and gas fitters install this type of connector in residential and light commercial piping applications where code or system design calls for a flared mechanical joint.\u003c\/p\u003e\n\u003cp\u003eThis connector is suited for use in natural gas, propane, refrigerant, and hydraulic fluid lines wherever a 45-degree SAE flare meets a female NPT port. Typical applications include gas appliance connections, refrigeration line sets, and compressed-air or fluid-transfer assemblies in both residential and commercial installations. The lead-free brass construction meets material requirements for potable water and gas service in jurisdictions following current plumbing and fuel-gas codes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLead-free brass construction meets low-lead requirements for potable water and gas applications\u003c\/li\u003e\n  \u003cli\u003e45-degree SAE flare x FNPT end connection for tool-tight, no-solder installation\u003c\/li\u003e\n  \u003cli\u003e750 psi maximum working pressure, static and dynamic\u003c\/li\u003e\n  \u003cli\u003e1\/2-inch tube OD flare end with 1\/2-inch female NPT thread\u003c\/li\u003e\n  \u003cli\u003eNPT thread standard ensures compatibility with standard pipe fittings and valves\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service fitting for residential and commercial piping systems requiring a 45-degree flare to female NPT connection at 1\/2-inch tube OD and 1\/2-inch NPT thread size.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or HVAC technician in accordance with applicable local codes, IFGC, or IPC requirements. Shut off the gas or fluid supply and depressurize the line before disassembling or installing any flare fitting. Use a properly sized flaring tool to produce a clean, uniform 45-degree flare on the tubing before seating the fitting. Do not overtighten; thread engagement should be hand-tight plus the manufacturer-recommended turns for NPT connections per applicable code.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Connector\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Lead-Free Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x FNPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure (Static)\u003c\/strong\u003e: 750 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure (Dynamic)\u003c\/strong\u003e: 750 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.14 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ANDERSON METALS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 754046-0808\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ANDERSON METALS","offers":[{"title":"Default Title","offer_id":51696682762546,"sku":"754046-0808","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2120c10ecce2afe1264a31ab7fafece7_e22f774d-7f65-42f5-ac63-67480dbd647b.jpg?v=1788345179","url":"https:\/\/voomisupply.com\/products\/anderson-metals-754046-0808-brass-flare-connector-1-2-in","provider":"Voomi Supply","version":"1.0","type":"link"}