{"product_id":"allied-machine-xtp32-34-93-spade-drill-insert-1-3-8-in-140-deg","title":"Allied Machine XTP32-34.93 Spade Drill Insert 1-3\/8 in 140 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ALLIED MACHINE AND ENGINEERING XTP32-34.93 is a carbide spade drill insert designed for high-performance hole-making in steel workpieces. Part of the GEN3SYS XT Pro series, it features a 1-3\/8 inch cutting diameter and a 140-degree point angle optimized for aggressive chip formation and accurate entry. The insert carries an AM420 PVD coating that improves wear resistance and extends tool life in demanding production environments. At 0.023 pounds, it is a precision-ground, replaceable insert that fits Seat Size 32 spade drill holders. Machinists and toolroom technicians specify this insert for high-volume drilling operations where consistent hole geometry and long run times are required.\u003c\/p\u003e\u003cp\u003eThis insert is suited for drilling operations in steel (ISO material code P) across both production machining and job-shop environments. It is intended for use in Seat Size 32 GEN3SYS XT Pro spade drill holders. The 140-degree point geometry performs well in through-hole and blind-hole applications where chip control and reduced thrust forces are priorities. CNC machining centers and drill presses with appropriate holder systems are the typical installation platforms for this insert type.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-3\/8 inch cutting diameter with a 140-degree point angle for controlled entry and chip flow\u003c\/li\u003e\n\u003cli\u003eCarbide substrate delivers hardness and thermal resistance in steel cutting applications\u003c\/li\u003e\n\u003cli\u003eAM420 PVD coating extends cutting edge life and reduces built-up edge on steel workpieces\u003c\/li\u003e\n\u003cli\u003eGEN3SYS XT Pro series design for use with compatible Seat Size 32 spade drill holders\u003c\/li\u003e\n\u003cli\u003eFractional inch measurement system for straightforward compatibility verification with standard holder inventory\u003c\/li\u003e\n\u003cli\u003eReplaceable insert design reduces tooling cost versus solid drill replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with Seat Size 32 GEN3SYS XT Pro series spade drill holders. Rated for primary workpiece material Steel (ISO code P).\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert seating and replacement should be performed by a qualified machinist or toolroom technician with the spindle fully stopped and machine power locked out per facility LOTO procedures. Verify the insert seat is clean and free of chips or debris before seating the new insert, as contamination will affect runout and hole geometry. Torque the insert fastener per the holder manufacturer specification plate or documentation supplied with the holder  -  do not estimate fastener torque. Inspect the seat and holder body for wear or damage any time an insert is changed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1-3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AM420\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: GEN3SYS XT Pro\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat Size\u003c\/strong\u003e: 32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (Code P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.63 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.023 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Fractional Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ALLIED MACHINE AND ENGINEERING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: XTP32-34.93\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALLIED MACHINE AND ENGINEERING","offers":[{"title":"Default Title","offer_id":51740190441778,"sku":"XTP32-34.93","price":233.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6cba6c1e24592c0dc303ee0d932d430b_0f397f7b-773e-4507-a73c-9e64bdeeba96.jpg?v=1788823356","url":"https:\/\/voomisupply.com\/products\/allied-machine-xtp32-34-93-spade-drill-insert-1-3-8-in-140-deg","provider":"Voomi Supply","version":"1.0","type":"link"}