{"product_id":"allied-machine-7c217p-0022-spade-drill-insert-11-16-in-carbide","title":"Allied Machine 7C217P-0022 Spade Drill Insert 11\/16 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ALLIED MACHINE AND ENGINEERING 7C217P-0022 is a solid carbide spade drill insert designed for high-performance hole-making in demanding machining applications. Built to GEN3SYS XT series specifications, this insert features a 140-degree point angle and an AM300 PVD coating that extends tool life across a broad range of workpiece materials. The 11\/16-inch diameter insert seats into a Series 17 holder and delivers consistent cutting geometry for production drilling. It is installed and used by machinists and tooling technicians in CNC turning centers, machining centers, and manual drill press setups requiring repeatable, precision-bored holes.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for use in both high-volume production and job-shop environments. Its AM300 coating and C2 (K20) carbide grade make it particularly effective when drilling stainless steel, cast iron, non-ferrous metals, and super-alloys including titanium. It fits into the GEN3SYS XT Series 17 spade drill holder system and is sold individually, making it a practical replacement for worn or damaged inserts without requiring full tool body replacement.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with C2 (K20) material grade for hardness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAM300 PVD coating provides thermal and abrasion resistance in difficult-to-machine alloys\u003c\/li\u003e\n  \u003cli\u003e140-degree point angle reduces thrust and improves chip formation on entry\u003c\/li\u003e\n  \u003cli\u003eGEN3SYS XT Series 17 seat compatibility for secure, repeatable insert indexing\u003c\/li\u003e\n  \u003cli\u003eRated for stainless steel, cast iron, non-ferrous metals, and super-alloys including titanium (ISO material codes M, K, N, S)\u003c\/li\u003e\n  \u003cli\u003eCompact insert profile: 1.75 inches length, 1.63 inches width, 0.75 inches height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with GEN3SYS XT Series 17 spade drill holders. Compatible workpiece materials include stainless steel, cast iron, non-ferrous metals, and super-alloys and titanium as indicated by ISO material codes M, K, N, and S.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or tooling technician. The machine spindle must be fully stopped and the machine placed in a safe, locked-out state before removing or seating any insert. Use the appropriate torx or insert-seating key specified by the tool holder manufacturer to secure the insert to the correct clamping torque per the holder documentation. Inspect the seat pocket for chips or debris before installing a new insert to ensure proper seating and prevent premature insert failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 11\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: C2 (K20)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AM300\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: GEN3SYS XT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeat Size\u003c\/strong\u003e: 17\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.63 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Height (Decimal)\u003c\/strong\u003e: 0.4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Stainless Steel, Cast Iron, Non-Ferrous Metal, Super-alloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ALLIED MACHINE AND ENGINEERING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7C217P-0022\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALLIED MACHINE AND ENGINEERING","offers":[{"title":"Default Title","offer_id":51733318959410,"sku":"7C217P-0022","price":140.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/09d3ebec1a4786f21f23edebed645391_fcbd4175-7a51-4887-95bd-9e5af0e02afb.jpg?v=1788754147","url":"https:\/\/voomisupply.com\/products\/allied-machine-7c217p-0022-spade-drill-insert-11-16-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}