{"product_id":"allied-machine-180a-609-spade-drill-insert-39-64-in-cobalt","title":"Allied Machine 180A-.609 Spade Drill Insert 39\/64 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ALLIED MACHINE AND ENGINEERING 180A-.609 is a spade drill insert designed for high-performance hole-making in demanding machining environments. Built from premium cobalt steel and coated with a physical vapor deposition (PVD) TiAlN finish, this insert delivers heat resistance and edge retention at elevated cutting speeds. It features a 132-degree point angle and measures 39\/64 inches in diameter with a thickness of 0.125 inches. Seat Size 0 keeps it compatible with the T-A spade drill holder system. Machining professionals and toolroom technicians rely on this insert for consistent, repeatable results in production drilling operations.\u003c\/p\u003e\u003cp\u003eThis insert is suited for drilling operations in steel, stainless steel, cast iron, superalloys, titanium, and hard materials. It fits within the T-A series spade drill system and is intended for use in machining centers, lathes, and manual drill press setups where replaceable insert tooling is preferred over solid-carbide or high-speed steel alternatives. The fractional inch sizing makes it a direct fit for shops operating on inch-based tooling standards. It is sold individually and is appropriate for both job-shop and production-floor use.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e39\/64 inch diameter with 132-degree point angle for accurate entry and reduced thrust\u003c\/li\u003e\n\u003cli\u003ePremium cobalt insert material provides toughness and thermal stability\u003c\/li\u003e\n\u003cli\u003eTiAlN PVD coating improves wear resistance and performance in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eSeat Size 0 fits T-A series spade drill holders\u003c\/li\u003e\n\u003cli\u003eRated for steel (P), stainless steel (M), cast iron (K), superalloys and titanium (S), and hard materials (H) per ISO workpiece material codes\u003c\/li\u003e\n\u003cli\u003eFractional inch system for compatibility with inch-standard tooling setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with T-A series spade drill holders that accept a Seat Size 0 insert. Verify holder seat size and insert diameter against your holder manufacturer specifications before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert installation should be performed by a qualified machinist or toolroom technician. Ensure the spade drill holder is fully removed from the spindle and the machine is powered down and locked out before handling or replacing inserts. Use the correct torque driver or wrench for the holder seat screw to avoid damaging the seating surface. Inspect the holder seat for chips or wear before seating the new insert.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 39\/64 inches (Fractional Inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 132 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Premium Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat Size\u003c\/strong\u003e: 0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Material Codes\u003c\/strong\u003e: P, M, K, S, H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ALLIED MACHINE AND ENGINEERING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 180A-.609\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALLIED MACHINE AND ENGINEERING","offers":[{"title":"Default Title","offer_id":51737185026354,"sku":"180A-.609","price":64.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c59c5ce13d5cf398c79adf0b24424049_544876ef-42de-40f9-9562-3c60b1059338.jpg?v=1788785353","url":"https:\/\/voomisupply.com\/products\/allied-machine-180a-609-spade-drill-insert-39-64-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}