{"product_id":"allied-machine-150t-0022-fb-spade-drill-insert-11-16-in-cobalt","title":"Allied Machine 150T-0022-FB Spade Drill Insert 11\/16 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ALLIED MACHINE AND ENGINEERING 150T-0022-FB is a cobalt spade drill insert designed for high-performance hole-making in demanding materials. Measuring 11\/16 inches in diameter with a 0.125-inch thickness, this insert features a 180-degree point angle and a TiN (Titanium Nitride) PVD coating for extended tool life and reduced heat buildup at the cutting edge. It belongs to Allied's T-A Series, a widely used replaceable-insert spade drill system. Machinists and tool-crib professionals install this insert into compatible T-A Series spade drill holders on CNC machining centers, lathes, and drill presses.\u003c\/p\u003e\n\u003cp\u003eThis insert is rated for use across a broad range of primary workpiece materials including steel, stainless steel, cast iron, super-alloys, and titanium, corresponding to ISO material codes P, M, K, and S. The 180-degree flat point geometry suits through-hole and interrupted-cut applications where a standard point angle would require spot-drilling first. It is a Seat Size 0 insert, positioning it at the smaller end of the T-A Series insert range, suitable for compact bore diameters in production or job-shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e11\/16-inch cutting diameter with 0.125-inch insert thickness for precise fit in Seat Size 0 holders\u003c\/li\u003e\n  \u003cli\u003eCobalt substrate provides enhanced heat and wear resistance compared to standard high-speed steel\u003c\/li\u003e\n  \u003cli\u003eTiN PVD coating reduces friction and extends edge life in ferrous and exotic alloy cutting\u003c\/li\u003e\n  \u003cli\u003e180-degree flat point angle eliminates the need for a center drill or spot drill in many applications\u003c\/li\u003e\n  \u003cli\u003eCompatible with ISO material groups P (steel), M (stainless), K (cast iron), and S (super-alloys and titanium)\u003c\/li\u003e\n  \u003cli\u003eT-A Series design allows quick insert indexing without removing the holder from the machine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with T-A Series Seat Size 0 spade drill holders from Allied Machine and Engineering. Verify holder seat size and diameter range before ordering to ensure proper seating and clamping.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert replacement is performed by a machinist or toolroom technician with the machine fully powered down and the spindle locked. Use the appropriate T-A Series insert screw and driver to seat the insert firmly against the holder pocket — do not overtighten or use impact tools on the clamping screw. Inspect the holder pocket for chips or damage before seating a new insert, as debris under the insert will cause runout and premature edge failure. Always handle cobalt inserts with care to avoid chipping the cutting edge prior to installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 11\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 180 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeat Size\u003c\/strong\u003e: 0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Super-alloys, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ALLIED MACHINE AND ENGINEERING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 150T-0022-FB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALLIED MACHINE AND ENGINEERING","offers":[{"title":"Default Title","offer_id":51728899801394,"sku":"150T-0022-FB","price":141.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f08b2c2967ba0da65a25e5f0bea0e1fb_b1826b9a-183a-452b-b3c8-518b0d282d1b.jpg?v=1788697525","url":"https:\/\/voomisupply.com\/products\/allied-machine-150t-0022-fb-spade-drill-insert-11-16-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}