{"product_id":"allied-machine-150a-13-spade-drill-insert-13mm-cobalt","title":"Allied Machine 150A-13 Spade Drill Insert 13mm Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ALLIED MACHINE AND ENGINEERING 150A-13 is a spade drill insert designed for high-performance hole-making in demanding metal-cutting applications. Part of the T-A series, this insert measures 13 mm in diameter and features a 132-degree point angle that promotes accurate entry and efficient chip evacuation. Manufactured from T15 cobalt material and finished with a TiAlN PVD coating, the 150A-13 is built to withstand elevated cutting temperatures and abrasive workpiece materials. At 0.125 inches thick and weighing approximately 0.1 pounds, it fits Seat Size 0 T-A series holders. Licensed machinists and tooling technicians install this insert in production and job-shop drilling operations.\u003c\/p\u003e\u003cp\u003eThe 150A-13 is suited for drilling steel, stainless steel, cast iron, super-alloys, and titanium in both horizontal and vertical machining setups. The T-A spade drill system is commonly used in high-volume production environments where indexable tooling reduces downtime compared to solid-drill regrinding. The TiAlN coating extends tool life in dry and semi-dry cutting conditions, making this insert a practical choice for operations that run higher spindle speeds or reduced coolant flow.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e13 mm cutting diameter in T-A series Seat Size 0\u003c\/li\u003e\n\u003cli\u003e132-degree point angle for accurate hole entry and reduced thrust\u003c\/li\u003e\n\u003cli\u003eT15 cobalt substrate for toughness in interrupted cuts\u003c\/li\u003e\n\u003cli\u003eTiAlN PVD coating for heat resistance and extended tool life\u003c\/li\u003e\n\u003cli\u003eCompatible with steel, stainless steel, cast iron, super-alloys, and titanium workpieces\u003c\/li\u003e\n\u003cli\u003eIndexable design eliminates regrinding and simplifies changeover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with T-A series spade drill holders accepting Seat Size 0 inserts. Suitable for workpiece materials classified as P (steel), M (stainless steel), K (cast iron), and S (super-alloys and titanium).\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or tooling technicians. Power down and lock out the machine spindle before seating or removing the insert. Use the correct torx or hex key specified for the T-A holder to secure the insert clamp screw — do not overtighten by feel alone; follow the holder manufacturer torque guidelines for Seat Size 0. Inspect the seat pocket for chips or debris before inserting, as contamination can cause insert tilt and premature failure.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 13 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeat Size\u003c\/strong\u003e: 0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 132 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: T15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Super-alloys, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ALLIED MACHINE AND ENGINEERING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 150A-13\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALLIED MACHINE AND ENGINEERING","offers":[{"title":"Default Title","offer_id":51736055480626,"sku":"150A-13","price":58.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c59c5ce13d5cf398c79adf0b24424049_c7936fa7-8934-46c5-ad39-c9936ea0d557.jpg?v=1788775637","url":"https:\/\/voomisupply.com\/products\/allied-machine-150a-13-spade-drill-insert-13mm-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}