{"product_id":"allied-7c232p-0110-spade-drill-insert-1-5-16-in-carbide","title":"Allied 7C232P-0110 Spade Drill Insert 1-5\/16 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ALLIED MACHINE AND ENGINEERING 7C232P-0110 is a solid carbide spade drill insert designed for high-performance hole-making in demanding machining applications. Built to the GEN3SYS XT series standard, it features a 1-5\/16 inch diameter, a 140-degree point angle, and an AM300 PVD coating applied over a C2 (K20) carbide grade substrate. This insert seats into a Seat Size 32 spade drill holder and is intended for use in CNC machining centers, drill presses, and turning centers where consistent, repeatable hole geometry is required. Machinists and tooling specialists working in production environments are the primary installers and users.\u003c\/p\u003e\n\u003cp\u003eThis insert is engineered for cutting stainless steel, cast iron, non-ferrous metals, and super-alloys including titanium — workpiece material codes M, K, N, and S. The GEN3SYS XT series is suited for both through-hole and blind-hole operations across a range of production and job-shop environments. The AM300 coating provides thermal and wear resistance that extends tool life when cutting these difficult materials at elevated feed rates.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-5\/16 inch diameter with a 140-degree point angle for aggressive entry and clean hole geometry\u003c\/li\u003e\n  \u003cli\u003eAM300 PVD coating over C2 (K20) solid carbide for extended wear resistance in tough materials\u003c\/li\u003e\n  \u003cli\u003eSeat Size 32 compatibility for direct installation into GEN3SYS XT series spade drill holders\u003c\/li\u003e\n  \u003cli\u003eRated for stainless steel, cast iron, non-ferrous metals, and super-alloys including titanium\u003c\/li\u003e\n  \u003cli\u003eCompact insert profile: 1.75 inches length, 1.63 inches width, 0.75 inches height\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.029 pounds for easy handling and quick changeover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with Seat Size 32 spade drill holders in the GEN3SYS XT series. Compatible workpiece materials include stainless steel, cast iron, non-ferrous metals, and super-alloys and titanium.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or tooling technician. Before seating or removing the insert, ensure the machine spindle is fully stopped, locked out, and the holder is secured in a vise or tool block. Use the manufacturer-specified insert screw and appropriate torx or hex key to secure the insert to the holder according to the holder documentation. Inspect the seat for chips or debris before installation to ensure proper insert seating and prevent premature edge failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 1-5\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeat Size\u003c\/strong\u003e: 32\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: GEN3SYS XT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: C2 (K20)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AM300\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Stainless Steel, Cast Iron, Non-Ferrous Metal, Super-alloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.63 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.029 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ALLIED MACHINE AND ENGINEERING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7C232P-0110\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALLIED MACHINE AND ENGINEERING","offers":[{"title":"Default Title","offer_id":51736423334194,"sku":"7C232P-0110","price":213.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/09d3ebec1a4786f21f23edebed645391_f650f2b2-abc3-4aaa-babc-13200b2a64e2.jpg?v=1788777889","url":"https:\/\/voomisupply.com\/products\/allied-7c232p-0110-spade-drill-insert-1-5-16-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}