{"product_id":"allied-7c132p-0109-spade-drill-insert-1-9-32-in-solid-carbide","title":"Allied 7C132P-0109 Spade Drill Insert 1-9\/32 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ALLIED MACHINE AND ENGINEERING 7C132P-0109 is a solid carbide spade drill insert engineered for high-performance drilling in steel and hard materials. With a 1-9\/32 inch diameter and a 140-degree point angle, this insert is designed for the GEN3SYS XT spade drill system, delivering precise entry geometry and extended tool life. The AM300 PVD coating reduces heat buildup and wear at the cutting edge, making it well-suited for demanding production environments. It fits Seat Size 32 holders and carries a C1 (K35) manufacturer grade. Licensed machinists, tool-and-die shops, and CNC production facilities rely on this insert for repeatable, high-accuracy hole-making operations.\u003c\/p\u003e\n\u003cp\u003eThis insert is used in metalworking applications where consistent bore quality and tool longevity are required. Its primary workpiece materials are steel and hard materials, making it appropriate for job shops and manufacturing facilities running ferrous alloys. The GEN3SYS XT series is designed for modular spade drill tooling systems, and this insert mounts directly into a compatible Seat Size 32 holder body. It is suitable for both horizontal and vertical machining center setups where spade drilling is preferred over twist drilling for deep or large-diameter holes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-9\/32 inch cutting diameter for precise large-bore hole-making\u003c\/li\u003e\n  \u003cli\u003e140-degree point angle reduces thrust and improves chip formation on entry\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction with C1 (K35) grade for hardness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAM300 PVD coating extends cutting edge life in steel and hard material applications\u003c\/li\u003e\n  \u003cli\u003eFits Seat Size 32 GEN3SYS XT spade drill holders for modular tooling setups\u003c\/li\u003e\n  \u003cli\u003eCompact geometry: 1.75 inches long, 1.63 inches wide, 0.75 inches in height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ALLIED MACHINE AND ENGINEERING GEN3SYS XT spade drill holder bodies in Seat Size 32. Intended for machining steel and hard materials as noted by workpiece material codes P and H.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Power down and lock out the machine spindle before seating or removing the insert. Use the appropriate torque driver or insert key specified for GEN3SYS XT holders to secure the insert without over-torquing the mounting screw. Inspect the holder seat for chips or debris before installing a new insert to ensure proper seating and runout accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 1-9\/32 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeat Size\u003c\/strong\u003e: 32\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: C1 (K35)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AM300\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Classification\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: GEN3SYS XT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.63 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.029 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel and Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ALLIED MACHINE AND ENGINEERING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7C132P-0109\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ALLIED MACHINE AND ENGINEERING","offers":[{"title":"Default Title","offer_id":51731379814706,"sku":"7C132P-0109","price":208.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/09d3ebec1a4786f21f23edebed645391_a975c5a9-2bce-4124-bb89-ab5d4125f45c.jpg?v=1788730223","url":"https:\/\/voomisupply.com\/products\/allied-7c132p-0109-spade-drill-insert-1-9-32-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}