{"product_id":"aeroflex-298-ac1412-epdm-pipe-insulation-1-4-in-id-6-ft","title":"Aeroflex 298-ac1412 Epdm Pipe Insulation 1\/4 in Id 6 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe AEROFLEX 298-ac1412 is a closed-cell EPDM foam rubber pipe insulation tube designed to thermally protect straight runs of small-diameter copper and stainless steel pipe or tubing. With a 1\/4 inch inside diameter, 1\/2 inch wall thickness, and a 6 foot factory-cut length, this tube delivers an R-value of 2.04 without requiring a separate vapor barrier. The unslit form means the tube must be threaded onto pipe during installation rather than wrapped around existing lines. Licensed mechanical and plumbing contractors install this product on refrigerant suction lines, chilled water lines, domestic cold water lines, and other applications where condensation control and thermal efficiency are priorities.\u003c\/p\u003e\u003cp\u003eThis insulation tube is suited for residential and light commercial mechanical systems where pipe diameters are small and runs are relatively straight. The 6 foot factory-cut length reduces field fabrication time. Its temperature range of -297 degrees F to 300 degrees F makes it appropriate for both low-temperature refrigeration applications and standard HVAC plumbing. The plenum rating allows installation in air-handling spaces where smoke and flame spread compliance is required by local mechanical codes.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eClosed-cell EPDM foam construction — inherently moisture-resistant, no separate vapor barrier required\u003c\/li\u003e\n\u003cli\u003ePlenum rated with flame spread index of 20 and smoke developed index of 50\u003c\/li\u003e\n\u003cli\u003eR-value of 2.04 with 1\/2 inch wall thickness\u003c\/li\u003e\n\u003cli\u003eOperating range from -297 degrees F to 300 degrees F\u003c\/li\u003e\n\u003cli\u003eNon-corrosive to copper and stainless steel pipe materials\u003c\/li\u003e\n\u003cli\u003eUV-resistant and paintable for exposed or outdoor-adjacent installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eSized for 1\/4 inch copper tube OD with a 1\/4 inch inside diameter fit. Suitable for copper and stainless steel pipe and tubing. Designed as an OEM-style insulation tube for use in refrigeration, HVAC, and plumbing applications requiring a 1\/4 inch ID unslit tube format.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis unslit tube must be slid onto pipe or tubing before fittings are installed, or the pipe run must be accessible for threading. Installers should follow local mechanical codes and ASTM standards referenced on the product for proper application and adhesive use at joints and seams. Shut down and isolate any refrigerant or fluid system before working on pipe insulation in pressurized or active lines. Do not stretch the tube excessively during installation, as distortion can reduce effective wall thickness and thermal performance.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Material\u003c\/strong\u003e: EPDM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm\u003c\/strong\u003e: Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Style\u003c\/strong\u003e: Unslit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 6 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR-Value\u003c\/strong\u003e: 2.04\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eK Value\u003c\/strong\u003e: 0.25 BTU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam Cell Type\u003c\/strong\u003e: Closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Operating Temperature\u003c\/strong\u003e: -297 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 300 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlenum Rating\u003c\/strong\u003e: Plenum Rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlame Spread Index\u003c\/strong\u003e: 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmoke Developed Index\u003c\/strong\u003e: 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Material Type\u003c\/strong\u003e: Copper, Stainless Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Properties\u003c\/strong\u003e: Corrosion-Resistant, UV-Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASTM C534, ASTM C692, ASTM D635, ASTM E84, ASTM E96B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA (subject to change)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: AEROFLEX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 298-ac1412\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEROFLEX","offers":[{"title":"Default Title","offer_id":51138280161586,"sku":"298-AC1412","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/305532716.jpg?v=1778252372","url":"https:\/\/voomisupply.com\/products\/aeroflex-298-ac1412-epdm-pipe-insulation-1-4-in-id-6-ft","provider":"Voomi Supply","version":"1.0","type":"link"}