{"product_id":"adp-he31130a130a000059-uncased-evaporator-coil-30000-btu-h","title":"Adp HE31130A130A000059 Uncased Evaporator Coil 30000 Btu\/h","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ADP HE31130A130A000059 is an uncased slab evaporator coil designed for residential and light commercial air conditioning and heat pump systems. Rated at 30,000 BTU\/h (30 MBTU\/h) and sized for 1.5 to 2.5 nominal tons, it handles up to 1,000 CFM of airflow. The coil features a copper slab construction housed in a galvanized steel cabinet and uses a piston metering device for refrigerant flow control. Compatible with R-410A refrigerant, it is configured with a right-hand uncased orientation and includes dual 3\/4-inch FPT condensate drain connections. Licensed HVAC technicians install this coil as part of a split system air handler or furnace coil cabinet installation.\u003c\/p\u003e\n\u003cp\u003eThis coil is intended for residential split system air conditioning and heat pump applications where an uncased coil is required for installation into an existing coil cabinet or air handler. The right-hand drain orientation suits specific cabinet configurations. The piston metering device supports standard fixed-orifice refrigerant circuits, and threaded expansion valves are available factory installed or as a field-installed kit for TXV-based systems. The copper refrigerant connections support brazing on both copper and aluminum slab models, and non-captive refrigerant lines with long stubs simplify field connections.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-efficiency lanced fin design improves heat transfer across the coil face\u003c\/li\u003e\n  \u003cli\u003eCoils are air pressure tested at 500 psi, helium leak tested, sealed with rubber plugs, and charged with dry air from the factory\u003c\/li\u003e\n  \u003cli\u003eMicroban antimicrobial additive in the drain pan inhibits mold and mildew growth\u003c\/li\u003e\n  \u003cli\u003eUV-resistant drain pan molded from high-temperature engineered polymer rated to 450 degrees F\u003c\/li\u003e\n  \u003cli\u003eDual 3\/4-inch FPT condensate drains located on front-left and front-right sides of the drain pan\u003c\/li\u003e\n  \u003cli\u003ePiston body is externally accessible for easy piston change-out or TXV field installation\u003c\/li\u003e\n  \u003cli\u003eEnhanced refrigerant pipe grommets provide a secure, tight seal for improved cabinet integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style uncased evaporator coil replacement for residential split system air conditioners and heat pumps using R-410A refrigerant with piston or TXV metering devices in the 1.5 to 2.5 nominal ton range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation must be performed by a licensed HVAC technician in accordance with local mechanical codes and manufacturer guidelines. Shut off all electrical power to the air handler and disconnect the refrigerant circuit before removing or installing the coil. Refrigerant connections are field-brazed copper; follow EPA Section 608 requirements for refrigerant handling. Confirm drain pan orientation and condensate drain routing before final installation to ensure proper condensate flow.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e: 30,000 BTU\/h (30 MBTU\/h)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNominal Tonnage\u003c\/strong\u003e: 1.5 - 2.5 tons\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAirflow\u003c\/strong\u003e: 1,000 CFM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRefrigerant\u003c\/strong\u003e: R-410A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMetering Device\u003c\/strong\u003e: Piston (externally accessible)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoil Material\u003c\/strong\u003e: Copper slab\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabinet Material\u003c\/strong\u003e: Galvanized steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 13 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e: 19.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLine Size\u003c\/strong\u003e: 3\/4 x 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrain Connection\u003c\/strong\u003e: Dual 3\/4-inch FPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrain Orientation\u003c\/strong\u003e: Right hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCasing\u003c\/strong\u003e: Uncased\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory Test Pressure\u003c\/strong\u003e: 500 psi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ADP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HE31130A130A000059\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ADP","offers":[{"title":"Default Title","offer_id":51283989430578,"sku":"HE31130A130A000059","price":424.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309278487.jpg?v=1781065242","url":"https:\/\/voomisupply.com\/products\/adp-he31130a130a000059-uncased-evaporator-coil-30000-btu-h","provider":"Voomi Supply","version":"1.0","type":"link"}