{"product_id":"accupro-acc-gs028002-cut-off-grooving-tool-bit-3-8-inch","title":"Accupro ACC-GS028002 Cut-off Grooving Tool Bit 3\/8 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO ACC-GS028002 is a single point cut-off and grooving tool bit designed for precision grooving operations on CNC lathes and manual turning centers. Built with a micrograin solid carbide tip, this neutral-cutting GS-style bit delivers tight dimensional control in grooving applications where groove width consistency is critical. The 3\/8-inch shank width and 3\/8-inch shank height provide a rigid, stable platform that minimizes chatter during interrupted cuts. With a maximum groove width of 0.030 inches and a maximum depth of cut of 0.090 inches, this tool bit is suited for fine, precise grooves in a range of workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis tool bit is used in production and job-shop turning environments where cut-off and grooving operations are performed on metals and hard materials. The neutral cutting direction makes it appropriate for straight plunge grooving applications. It is typically installed by machinists and CNC operators on toolholders that accept standard GS-style single point inserts or brazed tool bits. It fits well in both high-volume production runs and precision single-part work where groove geometry must stay within tight tolerances.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide tip for extended tool life and edge sharpness in grooving applications\u003c\/li\u003e\n  \u003cli\u003eNeutral cutting direction suits straight plunge grooving without left or right bias\u003c\/li\u003e\n  \u003cli\u003eGS tool bit style with 3\/8-inch square shank for rigid, low-vibration setup\u003c\/li\u003e\n  \u003cli\u003eMaximum groove width of 0.030 inches and minimum groove width of 0.028 inches for precise, repeatable cuts\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 0.090 inches supports shallow-to-mid-depth grooving work\u003c\/li\u003e\n  \u003cli\u003eMinimum nose radius of 0.002 inches allows tight corner geometry at the groove base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style single point tool bit for use in standard GS-style toolholders accepting 3\/8-inch shank cut-off and grooving tool bits on CNC and manual turning equipment.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC operators. Power down and lock out the machine before seating or removing the tool bit from the holder. Ensure the shank is fully seated and clamped square to the holder centerline before resuming cuts. Inspect the carbide tip for chipping or wear before each use, as micrograin carbide tips are brittle under impact and should not be used on interrupted cuts outside the tool's rated depth of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Type\u003c\/strong\u003e: Cut-Off and Grooving\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Style\u003c\/strong\u003e: GS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Groove Width\u003c\/strong\u003e: 0.0300 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Groove Width\u003c\/strong\u003e: 0.0280 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.0900 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Nose Radius\u003c\/strong\u003e: 0.0020 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: GS-028002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: ACC-GS028002\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51729140023602,"sku":"ACC-GS028002","price":64.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/81f4fa5962b5799ea7614a94008a3aa1.jpg?v=1788700723","url":"https:\/\/voomisupply.com\/products\/accupro-acc-gs028002-cut-off-grooving-tool-bit-3-8-inch","provider":"Voomi Supply","version":"1.0","type":"link"}