{"product_id":"accupro-a-6140190r-spotting-drill-1-9mm-2-flute-solid-carbide","title":"Accupro A-6140190R Spotting Drill 1.9mm 2-flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO A-6140190R is a solid carbide spotting drill designed to create accurate, centered starting points for follow-up drilling operations. Built with a 120-degree drill point angle and a 1.9mm cutting diameter, this tool delivers consistent cone geometry for drill walking prevention on flat, angled, or curved workpiece surfaces. The two-flute spiral configuration promotes chip evacuation during the spotting cycle. At 38mm overall length with a 2mm straight-cylindrical shank, it fits standard collet and chuck setups used in CNC machining centers and manual drill presses alike. The bright, uncoated finish makes it suitable for a wide range of general-purpose metalworking applications.\u003c\/p\u003e\u003cp\u003eThis spotting drill is intended for general-purpose spotting and center-marking operations in production and job-shop environments. The 6.5mm flute length and compact 38mm OAL make it well-suited for close-clearance fixtures and tight spindle approaches. Right-hand cutting direction aligns with standard machine spindle rotation. Machinists, CNC operators, and toolroom technicians working with ferrous and non-ferrous materials will find this tool appropriate for typical spot-drilling cycles before twist or carbide drill deployment.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120-degree point angle for accurate drill-point spotting and countersink starts\u003c\/li\u003e\n\u003cli\u003e1.9mm cutting diameter with 0.0748 inch decimal equivalent for precision fitment selection\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in general-purpose metalworking\u003c\/li\u003e\n\u003cli\u003eTwo spiral flutes for reliable chip clearance during spotting cycles\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish compatible with a broad range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard collet chucks and drill chucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose spotting drill for use in CNC machining centers, drill presses, and similar machine tool setups that accept a 2mm straight-cylindrical shank toolholder or collet.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of this tool should be performed by qualified machinists or CNC operators familiar with proper tool holding and speeds-and-feeds selection. Ensure the spindle is fully stopped and the machine is placed in a safe, locked-out state before changing or setting tools in the holder. Verify shank seating depth and collet runout before initiating a cutting cycle. Do not exceed the tool manufacturer's recommended speed and feed parameters for the workpiece material being machined.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 120 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1.9mm (0.0748 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 38mm (1.4961 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 6.5mm (0.2559 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 2mm (0.0787 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Spotting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: A-6140190R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51747643130162,"sku":"A-6140190R","price":262.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/472e7ced0d6f1592831970d8a8ee2b59_c25daa2a-635f-48f1-994d-d86533962409.jpg?v=1788883975","url":"https:\/\/voomisupply.com\/products\/accupro-a-6140190r-spotting-drill-1-9mm-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}