{"product_id":"accupro-a-6120296r-micro-drill-bit-2-96-mm-solid-carbide","title":"Accupro A-6120296R Micro Drill Bit 2.96 Mm Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO A-6120296R is a solid carbide micro drill bit designed for small-diameter, precision drilling applications. Built to the Miniature Series specification, it features a 2.96 mm (0.1165 inches) cutting diameter, a 120-degree drill point angle, and a bright uncoated finish. The straight-cylindrical shank measures 3.00 mm in diameter, and the overall length is 38.00 mm. Solid carbide construction provides the rigidity and wear resistance needed when drilling tight-tolerance holes in hard or abrasive materials. This bit is suited for machinists, toolmakers, and precision fabricators working on close-tolerance parts.\u003c\/p\u003e\n\u003cp\u003eThe A-6120296R is intended for applications requiring small-diameter hole generation in metalworking, electronics manufacturing, medical device fabrication, and general precision machining environments. The right-hand cutting direction and standard point type make it compatible with conventional CNC machining centers, drill presses, and handheld precision drilling equipment. The 14.00 mm flute length provides adequate chip evacuation for the diameter class, and the regular spiral flute geometry supports consistent chip flow in typical drilling operations where coolant-through is not required or available.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and extended tool life in hard materials\u003c\/li\u003e\n  \u003cli\u003e2.96 mm cutting diameter with a 3.00 mm straight-cylindrical shank for secure chuck engagement\u003c\/li\u003e\n  \u003cli\u003e120-degree drill point angle suited to standard through-hole and blind-hole drilling\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish — no coating buildup to affect dimensional accuracy at micro diameters\u003c\/li\u003e\n  \u003cli\u003eRegular spiral, right-hand flute geometry for predictable chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCoolant-through not required — simplifies setup in standard machine configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a Miniature Series replacement or stock micro drill bit for precision machining operations requiring a 2.96 mm diameter solid carbide tool with a 3.00 mm straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or toolroom personnel familiar with micro-diameter tooling. Secure the straight-cylindrical shank firmly in a precision collet or drill chuck rated for the shank diameter before use. Power down and fully de-energize the machine spindle before loading or changing the bit. Micro drill bits are brittle — avoid side loading, excessive feed rates, or use in worn or loose tool holders, as these conditions can cause sudden tool breakage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2.96 mm (0.1165 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 38.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 14.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 120 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Miniature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: A-6120296R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51728109502770,"sku":"A-6120296R","price":252.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/86706a67c64c26038ed21e3368f511b0_31041d81-0cb5-400b-9a1b-dab5a20f666a.jpg?v=1788688126","url":"https:\/\/voomisupply.com\/products\/accupro-a-6120296r-micro-drill-bit-2-96-mm-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}