{"product_id":"accupro-95172634-corner-radius-end-mill-3-4-in-3-flute-carbide","title":"Accupro 95172634 Corner Radius End Mill 3\/4 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 95172634 is a solid carbide corner radius end mill designed for precision milling in demanding metalworking and machining applications. With a 3\/4 inch mill diameter, a 0.0300 inch corner radius, and a 2 inch length of cut, this tool is built for long-reach profiling, slotting, and contouring operations. The ZrN (zirconium nitride) coating improves wear resistance and reduces friction, extending tool life in harder workpiece materials. Three right-hand spiral flutes with a 37-degree helix angle promote efficient chip evacuation and smooth cutting action. Machinists and CNC operators in job shops, tool rooms, and production environments rely on this end mill for consistent, high-quality surface finishes.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for use in vertical and horizontal CNC machining centers as well as manual knee mills where the spindle taper and toolholder accept a 3\/4 inch shank. The Smart-Weldon shank type provides secure clamping in compatible toolholders. The extended reach design and 5 inch overall length make it practical for deep-cavity work and mold profiling where standard-length tools cannot reach the floor of a pocket. The centercutting geometry allows plunge entry directly into the workpiece when required. This tool fits within the ACCUPRO ST series lineup intended for general-purpose to high-performance milling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.0300 inch corner radius with a tight tolerance of +0.00000 to -0.00100 inch for repeatable edge geometry\u003c\/li\u003e\n  \u003cli\u003eZrN coating for improved heat and wear resistance in abrasive or harder materials\u003c\/li\u003e\n  \u003cli\u003e37-degree helix angle with right-hand spiral flutes for effective chip evacuation\u003c\/li\u003e\n  \u003cli\u003eExtended reach and 5 inch overall length for deep-cavity and mold profiling applications\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eUltra fine micrograin solid carbide substrate for edge sharpness and rigidity\u003c\/li\u003e\n  \u003cli\u003eSmart-Weldon shank type for secure, precise toolholder engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement and standard-production corner radius end mill for use in CNC machining centers and manual mills accepting a 3\/4 inch Smart-Weldon shank in compatible toolholders.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Before inserting or removing the end mill, ensure the machine spindle is fully stopped and the control is in a safe state. Use a calibrated toolholder and appropriate collet or chuck rated for the 3\/4 inch shank diameter to achieve runout within the specified TIR maximum of 0.0004 inch. Inspect the cutting edges for chips or damage before each use and follow the tooling manufacturer's recommended speeds and feeds for the workpiece material and coating type.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0300 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius Tolerance\u003c\/strong\u003e: +0.00000 to -0.00100 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches (50.80 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches (127 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (19.05 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Smart-Weldon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Ultra Fine Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ZrN (Zirconium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.001000 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTIR Maximum\u003c\/strong\u003e: 0.0004 inch (0.01 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: ST\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95172634\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51733704704306,"sku":"95172634","price":567.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/62c721a3bee0608971967bdc9cbe0094.jpg?v=1788758543","url":"https:\/\/voomisupply.com\/products\/accupro-95172634-corner-radius-end-mill-3-4-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}