{"product_id":"accupro-95169719-corner-radius-end-mill-1-2-in-5-flute","title":"Accupro 95169719 Corner Radius End Mill 1\/2 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 95169719 is a solid carbide corner radius end mill designed for precision milling in demanding machining environments. It features a 1\/2 inch diameter with a 0.030 inch corner radius and an AlCrTiN coating that resists heat and wear during high-speed cutting operations. The 5-flute, right-hand spiral geometry with a 38-degree helix angle promotes efficient chip evacuation and smooth surface finishes. With an overall length of 4 inches and a 5\/8 inch length of cut, this centercutting tool handles both plunge and profile operations. Micrograin carbide construction provides the hardness and toughness needed for ferrous and non-ferrous materials. Licensed machinists and CNC programmers are the primary users of this tooling.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling operations requiring extended reach into deep pockets, slots, or complex contoured features. The 1-1\/2 inch reach length and 0.475 inch neck diameter allow access to areas where standard-length tooling cannot reach without sacrificing rigidity. The variable index design reduces chatter and harmonics during extended-reach cuts. Typical applications include die and mold work, aerospace component machining, and precision part production on vertical and horizontal machining centers. Single-end configuration makes this a replace-and-discard tool for consistent cutting geometry throughout its service life.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAlCrTiN coating for elevated heat resistance and extended tool life in hard materials\u003c\/li\u003e\n  \u003cli\u003e5-flute, 38-degree helix spiral geometry for improved chip flow and surface finish\u003c\/li\u003e\n  \u003cli\u003e0.030 inch corner radius reduces stress concentration and extends part and tool life\u003c\/li\u003e\n  \u003cli\u003eExtended reach design with 1-1\/2 inch reach length and 0.475 inch neck diameter\u003c\/li\u003e\n  \u003cli\u003eVariable index flute spacing minimizes vibration and chatter during deep cuts\u003c\/li\u003e\n  \u003cli\u003eCentercutting capability allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use solid carbide end mill for 1\/2 inch collet or end mill holders on standard CNC machining centers requiring a right-hand cut, right-hand flute, single-end corner radius tool.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Secure the shank fully into a 1\/2 inch collet, hydraulic chuck, or shrink-fit holder to the manufacturer-specified gauge line before tightening. Ensure the machine spindle is fully stopped and the tool path program is verified before initiating a cut. Do not exceed the tool manufacturer's recommended feeds and speeds for the coating and material combination being machined.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.475 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlCrTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.001000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95169719\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51744582107442,"sku":"95169719","price":172.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1329f887998f5c4069ae77effa796f5e.jpg?v=1788858598","url":"https:\/\/voomisupply.com\/products\/accupro-95169719-corner-radius-end-mill-1-2-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}