{"product_id":"accupro-95168855-corner-chamfer-end-mill-5-8-in-4-flute","title":"Accupro 95168855 Corner Chamfer End Mill 5\/8 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 95168855 is a solid carbide corner chamfer end mill designed for precision chamfering and edge-breaking operations on ferrous and non-ferrous workpieces. Measuring 0.6250 inches in diameter with a 4-flute, right-hand spiral configuration, it delivers clean, consistent chamfer geometry at a 45-degree chamfer angle with a 0.0150-inch chamfer width. The AlTiN coating provides elevated heat resistance, extending tool life in high-speed dry or near-dry cutting applications. Micrograin carbide substrate adds toughness and wear resistance at the cutting edge. A variable helix reduces harmonic chatter, improving surface finish in demanding setups.\u003c\/p\u003e\n\u003cp\u003eThis end mill suits milling centers and CNC machining operations where edge preparation, deburring, and chamfering are required on precision parts. The extended reach design, with a reach length of 3-3\/8 inches and an overall length of 6 inches, accommodates deep-pocket and hard-to-reach workpiece features. The 3\/4-inch length of cut and single-end construction make it well suited to production environments where dimensional consistency and tool repeatability are priorities. Machinists running tight-tolerance aerospace, die-mold, or general metalworking programs will find this geometry appropriate for controlled chamfer applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and extended tool life\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for high-temperature resistance in dry and semi-dry cutting\u003c\/li\u003e\n  \u003cli\u003eVariable helix geometry reduces chatter and improves surface finish\u003c\/li\u003e\n  \u003cli\u003e45-degree chamfer angle with 0.0150-inch chamfer width for precise edge preparation\u003c\/li\u003e\n  \u003cli\u003eExtended reach at 3-3\/8 inches accommodates deep-pocket and offset features\u003c\/li\u003e\n  \u003cli\u003eCentercutting capability allows plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement for standard 5\/8-inch shank corner chamfer end mill applications on CNC machining centers and manual mills accepting 5\/8-inch tool holders. No specific OEM model compatibility was provided in the product data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer guidelines for toolholder torque and runout specifications. Verify holder cleanliness and shank seating before tightening to avoid runout errors that can accelerate edge wear. Confirm spindle direction is set to right-hand rotation before engaging the cut. Always reference the machine control and shop safety procedures when loading or changing cutting tools.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.6250 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.7500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.0150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 3-3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Variable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 to -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95168855\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51727276736818,"sku":"95168855","price":430.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3fcf264c36b8d9fcc61484771f12ed99.jpg?v=1788675782","url":"https:\/\/voomisupply.com\/products\/accupro-95168855-corner-chamfer-end-mill-5-8-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}