{"product_id":"accupro-95168717-corner-chamfer-end-mill-5-8in-4-flute-altin","title":"Accupro 95168717 Corner Chamfer End Mill 5\/8in 4 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 95168717 is a solid carbide corner chamfer end mill designed for precision chamfering and edge-breaking on ferrous and non-ferrous workpieces. It features a 5\/8-inch cutting diameter, a 2-1\/4-inch length of cut, and a 45-degree chamfer angle with a 0.0150-inch chamfer width. The micrograin carbide substrate is coated with AlTiN (aluminum titanium nitride) for improved hardness and heat resistance at elevated cutting speeds. This is a single-end, centercutting tool with a right-hand flute direction and right-hand cutting direction. It is installed and operated by machinists in CNC milling and manual milling applications where chamfer geometry accuracy is critical.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for production and job-shop environments requiring consistent chamfer results on steel, stainless, cast iron, and similar materials. The long-length designation and 5-inch overall length allow access in deeper setups or when extended reach is needed beyond what standard-length tools provide. The variable helix design helps reduce chatter and harmonic vibration during cutting, which improves surface finish and tool life in demanding applications. The 5\/8-inch shank diameter matches the cutting diameter for straightforward collet or end mill holder selection.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e45-degree chamfer angle with 0.0150-inch chamfer width for defined edge geometry\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides heat and wear resistance for higher-speed cutting\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction for rigidity and edge retention\u003c\/li\u003e\n\u003cli\u003eVariable helix spiral flutes reduce chatter and improve surface finish\u003c\/li\u003e\n\u003cli\u003eCentercutting capable for plunge entry when required\u003c\/li\u003e\n\u003cli\u003eLong-length design at 5 inches overall length for extended-reach applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining centers and manual mills using 5\/8-inch collets or end mill holders with right-hand spindle rotation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool holder is properly torqued to the manufacturer-specified value for the holder type in use before initiating any cut. Verify collet or holder runout is within acceptable limits prior to cutting, as excessive runout accelerates wear on carbide tooling. Do not exceed the tool manufacturer-recommended depth-of-cut or feed-per-tooth parameters for the workpiece material being machined.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/8 inches (0.6250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2-1\/4 inches (2.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.0150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95168717\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51752910127410,"sku":"95168717","price":360.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/551aa7a023f2fc41bae21f003954e6f2_707b6e24-d2b4-49bb-b2b0-6e218b6f4ead.jpg?v=1788931015","url":"https:\/\/voomisupply.com\/products\/accupro-95168717-corner-chamfer-end-mill-5-8in-4-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}