{"product_id":"accupro-95168601-corner-radius-end-mill-1-4-in-6-flute","title":"Accupro 95168601 Corner Radius End Mill 1\/4 in 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 95168601 is a solid carbide corner radius end mill designed for precision milling in ferrous and hardened materials. It features a 1\/4-inch diameter with a 0.0300-inch corner radius, six flutes for increased chip load capacity, and an AlTiN coating that improves heat resistance and tool life at elevated cutting temperatures. The 3\/4-inch length of cut and 2-1\/2-inch overall length make it suitable for standard-depth profiling and slotting operations. It is a single-end, centercutting design with right-hand flute direction and right-hand cutting direction, allowing direct plunge entry into workpiece material. Machinists and tool-and-die professionals are the primary installers and users of this tooling.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use in CNC machining centers and manual knee mills where close-tolerance profiling, contouring, and corner-radius feature generation are required. The micrograin carbide substrate and 25-degree helix angle support smooth cutting action in steel, stainless steel, cast iron, and similar hard materials. The spiral flute geometry promotes efficient chip evacuation during full-depth passes. It is commonly used in job shops, production machining environments, and tool rooms where tight dimensional tolerances and fine surface finishes are priorities.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid micrograin carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n\u003cli\u003eAlTiN coating enhances heat resistance and extends tool life in dry or high-speed cutting\u003c\/li\u003e\n\u003cli\u003eSix-flute design increases feed rate capability and improves surface finish\u003c\/li\u003e\n\u003cli\u003e0.0300-inch corner radius reduces stress concentration and prevents sharp-corner chipping\u003c\/li\u003e\n\u003cli\u003eCentercutting end geometry allows plunge milling and ramping operations\u003c\/li\u003e\n\u003cli\u003e25-degree helix angle promotes smooth chip flow and reduced cutting forces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 1\/4-inch collet chucks, end mill holders, or shrink-fit toolholders on CNC machining centers and compatible milling machines accepting 1\/4-inch shank tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by qualified machinists with the machine in a fully stopped and locked-out state per applicable machine safety procedures. Ensure the shank is fully seated and clamped to the specified holding depth in the toolholder before operation. Verify runout with a dial indicator after setup, as excessive runout will accelerate tool wear and degrade surface finish. Do not exceed the tool manufacturer's recommended cutting parameters for the substrate and coating combination.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.2500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.7500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0300 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 25 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95168601\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51729158897970,"sku":"95168601","price":133.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e6e57173b6fb517abedaa55b01b669d8.jpg?v=1788701096","url":"https:\/\/voomisupply.com\/products\/accupro-95168601-corner-radius-end-mill-1-4-in-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}