{"product_id":"accupro-95168548-corner-chamfer-end-mill-7-16-in-4-flute","title":"Accupro 95168548 Corner Chamfer End Mill 7\/16 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 95168548 is a solid carbide corner chamfer end mill designed for precision chamfering and edge-breaking operations on ferrous and non-ferrous materials. Built from micrograin solid carbide and coated with AlTiN (aluminum titanium nitride), this tool delivers extended tool life in high-heat cutting environments. It features a 45-degree chamfer angle, a 0.0150-inch chamfer width, and a variable helix design that reduces chatter and harmonics during the cut. The 4-flute, right-hand cutting configuration with a spiral flute geometry is suited for machinists and CNC operators running finishing passes where edge quality and dimensional accuracy are critical.\u003c\/p\u003e\u003cp\u003eThis end mill is sized for stub-length applications requiring a compact reach. The 7\/16-inch cutting diameter and 9\/16-inch length of cut make it well suited for chamfering drilled hole edges, deburring part features, and producing consistent 45-degree chamfers on machined components. It is a single-end, centercutting tool, allowing plunge entry where the operation requires it. Typical use cases include CNC machining centers and manual mills working with steel, stainless steel, titanium, and hardened materials where the AlTiN coating provides the thermal resistance needed to maintain edge integrity.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and wear resistance in demanding cutting conditions\u003c\/li\u003e\n\u003cli\u003eAlTiN coating provides high-heat resistance, extending tool life on ferrous and hardened materials\u003c\/li\u003e\n\u003cli\u003eVariable helix geometry reduces vibration and chatter for improved surface finish\u003c\/li\u003e\n\u003cli\u003e45-degree chamfer angle with 0.0150-inch chamfer width for consistent, repeatable edge breaks\u003c\/li\u003e\n\u003cli\u003eCentercutting capability allows plunge entry without a pre-drilled pilot\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand spiral, 4-flute configuration for efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining centers and manual milling machines accepting a 7\/16-inch straight shank end mill holder or collet chuck.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes must be performed with the spindle fully powered down and locked out per applicable machine safety procedures. Secure the 7\/16-inch shank in a collet chuck or end mill holder rated for the intended RPM and feed load. Verify runout at the shank before running production cuts. AlTiN-coated carbide tooling should be run dry or with air blast on ferrous materials; avoid water-based coolants that can cause thermal shock to the carbide substrate.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.4375 inches (7\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 7\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.5625 inches (9\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer Width\u003c\/strong\u003e: 0.0150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 to -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 to -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95168548\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51736356553010,"sku":"95168548","price":113.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f012b35e5c9cf958b3087969b6819048.jpg?v=1788777417","url":"https:\/\/voomisupply.com\/products\/accupro-95168548-corner-chamfer-end-mill-7-16-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}