{"product_id":"accupro-95168537-corner-radius-end-mill-1-2-in-5-flute","title":"Accupro 95168537 Corner Radius End Mill 1\/2 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 95168537 is a solid carbide corner radius end mill designed for precision milling in ferrous and hard materials. It features a 1\/2 inch diameter cutting edge with a 0.1250 inch corner radius and five flutes ground from micrograin carbide stock. The AlTiN coating increases surface hardness and heat resistance, making this tool well suited for high-speed and high-temperature cutting conditions. With a 6 inch overall length and an extended reach configuration, it handles deep-cavity and long-reach milling operations that standard-length end mills cannot reach. Licensed machinists and CNC programmers working in aerospace, die-and-mold, and general machining operations specify this tool for demanding contouring and profiling passes.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling operations requiring a long reach and a controlled corner radius profile. The 5\/8 inch length of cut, 3-3\/8 inch reach length, and 0.4500 inch neck diameter allow it to reach into deep pockets and slots while maintaining rigidity. The centercutting geometry permits direct plunge entry. Right-hand flute direction and right-hand cutting direction are standard for conventional CNC vertical and horizontal machining center setups. The variable helix design reduces harmonic chatter during extended-reach passes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.1250 inch corner radius reduces stress concentration and extends workpiece edge life\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life in ferrous materials\u003c\/li\u003e\n  \u003cli\u003eVariable helix flute geometry minimizes chatter during long-reach and high-speed passes\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge milling without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 3-3\/8 inch reach length and reduced 0.4500 inch neck diameter for deep-cavity access\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for dimensional stability and edge retention\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style solid carbide corner radius end mill for use in standard 1\/2 inch collet or end mill holders on CNC vertical machining centers, horizontal machining centers, and manual knee mills equipped with appropriate toolholding.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. The machine spindle must be fully stopped and the tool changer or spindle lock engaged before inserting or removing the end mill. Seat the 1\/2 inch shank fully into a matched collet or end mill holder and torque the retention mechanism per the toolholder manufacturer specifications. Inspect the cutting edges and coating for chips or damage before each use; a damaged AlTiN coating or chipped flute can cause premature tool failure and workpiece damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.1250 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.6250 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.4500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 3.3750 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95168537\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51748397744434,"sku":"95168537","price":310.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/89f478a0ca91001114c87bf733cad861.jpg?v=1788893275","url":"https:\/\/voomisupply.com\/products\/accupro-95168537-corner-radius-end-mill-1-2-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}