{"product_id":"accupro-95168469-corner-radius-end-mill-0-2813-in-4-flute","title":"Accupro 95168469 Corner Radius End Mill 0.2813 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 95168469 is a solid carbide corner radius end mill designed for precision milling operations in ferrous and non-ferrous materials. The cutter measures 0.2813 inches in diameter with a 0.0150-inch corner radius, a 0.6250-inch length of cut, and a 2.5-inch overall length. A 5\/16-inch shank diameter keeps it compatible with standard collet systems. The AlTiN coating provides thermal resistance and extended tool life in high-speed and dry machining environments. Four flutes and a variable helix geometry reduce harmonics and improve chip evacuation. Centercutting capability allows plunge entry. Intended for use by machinists and CNC operators in job shop and production environments.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for finish and semi-finish milling, slotting, profiling, and ramping operations on steel, stainless steel, cast iron, and hard alloys. The right-hand cutting direction and right-hand spiral flute geometry are standard for conventional CNC machining center setups. The regular-length flute design keeps deflection low, making it appropriate for tight-tolerance work where dimensional accuracy is critical. The micrograin carbide substrate supports higher surface speeds compared to standard carbide grades.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.2813-inch mill diameter with a 0.0150-inch corner radius for edge strength and surface finish\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for heat resistance and extended tool life in dry or minimal-lubrication cutting\u003c\/li\u003e\n\u003cli\u003eVariable helix flute geometry reduces chatter and vibration during cut\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003e4-flute, single-end configuration with right-hand cut and right-hand spiral\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard shank solid carbide corner radius end mill compatible with 5\/16-inch collet chucks and end mill holders used in CNC machining centers and manual knee mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is in a safe lockout state before changing tooling. Seat the shank fully and evenly in a clean, undamaged collet or tool holder to the specified engagement depth. Verify runout with a dial indicator before beginning production cuts, as excessive runout accelerates wear and degrades surface finish.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.2813 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0150 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.6250 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.3125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95168469\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51735352312114,"sku":"95168469","price":93.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2d0a809bfb7a70ff64b2c29f45de983e.jpg?v=1788772056","url":"https:\/\/voomisupply.com\/products\/accupro-95168469-corner-radius-end-mill-0-2813-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}