{"product_id":"accupro-95168458-corner-radius-end-mill-1-2-in-5-flute","title":"Accupro 95168458 Corner Radius End Mill 1\/2 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 95168458 is a solid carbide corner radius end mill designed for precision milling operations in ferrous and non-ferrous materials. Built from micrograin solid carbide and coated with AlTiN (aluminum titanium nitride), it delivers extended tool life under high-heat cutting conditions. The 0.0600-inch corner radius reduces stress concentration at the cutting edge and produces a consistent, controlled blend radius on workpiece features. With 5 flutes and a variable helix geometry, it promotes smooth chip evacuation and reduces chatter during aggressive finishing and semi-finishing passes. This is a single-end, center-cutting tool, meaning it can plunge directly into material as well as perform peripheral and slot milling.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC machining centers and manual mills in job shops, tool rooms, and production environments. It is appropriate for milling steel, stainless steel, cast iron, and high-temperature alloys where AlTiN coating provides thermal resistance. The 1-1\/4-inch length of cut and 3-inch overall length make it a standard-reach tool for general cavity, pocket, and contour milling work. Right-hand flute direction and right-hand cutting direction are standard for conventional CNC setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating extends tool life in high-temperature cutting applications\u003c\/li\u003e\n  \u003cli\u003e0.0600-inch corner radius reduces edge chipping and blends workpiece transitions\u003c\/li\u003e\n  \u003cli\u003eVariable helix design reduces harmonic chatter and improves surface finish\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting geometry allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003e5-flute configuration supports higher feed rates on finishing passes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and mills accepting a 1\/2-inch straight shank. Standard ER collet chucks, end mill holders, and hydraulic toolholders with a 1\/2-inch bore are compatible with this shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Seat the shank to the full recommended engagement depth in the toolholder and torque the retention mechanism per the toolholder manufacturer specifications. Verify runout with a dial indicator after installation, as excessive runout will accelerate wear and degrade surface finish on a 5-flute tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.2500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95168458\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51737722552626,"sku":"95168458","price":151.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5d99339dee946d1673af3b150870d7a5.jpg?v=1788792805","url":"https:\/\/voomisupply.com\/products\/accupro-95168458-corner-radius-end-mill-1-2-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}