{"product_id":"accupro-89698880-spotting-drill-1-in-carbide-120-deg","title":"Accupro 89698880 Spotting Drill 1 in Carbide 120 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 89698880 is a solid carbide spotting drill designed to create accurate center points and chamfers before through-hole or deep-hole drilling operations. It features a 120-degree drill point angle, a 1-inch cutting diameter, and a 4-inch overall length. The two-flute spiral geometry promotes clean chip evacuation and consistent spot geometry on a wide range of workpiece materials. The bright, uncoated finish makes this tool well suited for general-purpose shop environments where coolant or dry cutting is used. Machinists and toolroom professionals install this drill in CNC machining centers, drill presses, and manual mills.\u003c\/p\u003e\n\u003cp\u003eThis spotting drill is intended for general-purpose spotting and center-marking applications in production and job-shop environments. Its straight-cylindrical shank fits standard drill chucks and collet holders sized for a 1-inch shank diameter. The 1.75-inch flute length provides adequate depth for spotting operations without excessive tool overhang. Single-ended construction means the full cutting geometry is concentrated at one end, which is typical for precision spotting work where runout control matters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e120-degree drill point angle for accurate spot placement and chamfering before finish drilling\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance across general-purpose materials\u003c\/li\u003e\n  \u003cli\u003eTwo-flute spiral design promotes efficient chip clearance during spotting\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish compatible with dry cutting and standard cutting fluid applications\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank with 1-inch diameter fits standard collets and drill chucks\u003c\/li\u003e\n  \u003cli\u003eSingle-ended, right-hand cut geometry for conventional spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers, drill presses, and manual milling machines equipped with toolholders or chucks accepting a 1-inch straight-cylindrical shank. Suited for general-purpose spotting operations on ferrous and non-ferrous workpieces.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following standard toolholding procedures. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Seat the shank fully in the collet or chuck and torque the holder to the toolholder manufacturer's specification. Confirm runout with an indicator before beginning production cuts, as excessive runout will affect spot accuracy and tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 120 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Spotting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle\/Double Ended\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.22 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 89698880\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51735158522162,"sku":"89698880","price":419.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3a3b5e99e0db814d2ba02b6342d1e3a5.jpg?v=1788769935","url":"https:\/\/voomisupply.com\/products\/accupro-89698880-spotting-drill-1-in-carbide-120-deg","provider":"Voomi Supply","version":"1.0","type":"link"}