{"product_id":"accupro-771812-double-angle-collet-chuck-cat40","title":"Accupro 771812 Double Angle Collet Chuck CAT40","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 771812 is a Double Angle (DA180 series) collet chuck designed for precision CNC milling and machining center applications. It accepts a CAT40 Dual Contact Taper shank and accommodates collets with a capacity range of 0.046 to 0.75 inches. Projection measures 4 inches with an overall length of 6-11\/16 inches. Total Indicated Runout (TIR) is held to 0.001 inches, and the chuck is balanced to 20,000 RPM for high-speed spindle use. Through-spindle and DIN flange coolant delivery are supported. The unit weighs 3 pounds.\u003c\/p\u003e\u003cp\u003eThis chuck is suited for use on CAT40-spindle vertical and horizontal machining centers in both production and job-shop environments. It is commonly used where high rotational speed, coolant-through capability, and tight runout tolerances are required simultaneously. The DA180 collet series is a widely adopted double angle format, making replacement collets straightforward to source. Typical applications include end milling, drilling, and reaming operations where spindle balance and concentricity directly affect surface finish and tool life.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDA180 double angle collet system with 0.046 to 0.75 inches capacity range\u003c\/li\u003e\n\u003cli\u003eCAT40 Dual Contact Taper shank for rigid, repeatable spindle engagement\u003c\/li\u003e\n\u003cli\u003e0.001 inches TIR for tight concentricity and extended cutting tool life\u003c\/li\u003e\n\u003cli\u003eBalanced to 20,000 RPM for high-speed machining center use\u003c\/li\u003e\n\u003cli\u003eThrough-spindle and DIN flange coolant delivery (coolant type: Through-Spindle and DIN Flange)\u003c\/li\u003e\n\u003cli\u003e4 inches projection with 1-1\/4 inches nose diameter for reach into confined workpiece features\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with CAT40-spindle machining centers that accept Dual Contact Taper toolholders. Compatible with DA180 series double angle collets with capacity from 0.046 to 0.75 inches.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and removal of taper-shank toolholders should be performed by a qualified machinist or CNC setup technician with the spindle fully powered down and locked out per facility LOTO procedures. Clean the CAT40 taper bore and toolholder shank thoroughly before seating to ensure full dual-contact engagement. Use the appropriate spanner wrench or collet nut tightening tool for the 1.44 inches hex and collet nut diameter — do not use makeshift tools that can damage the nut or collet seating surfaces. Inspect TIR at setup with a dial indicator to confirm concentricity before beginning a production run.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet System\u003c\/strong\u003e: Double Angle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Series\u003c\/strong\u003e: DA180\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Dual Contact Taper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTaper Size\u003c\/strong\u003e: CAT40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Collet Capacity\u003c\/strong\u003e: 0.046 inches (3\/64 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Collet Capacity\u003c\/strong\u003e: 0.75 inches (9\/16 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProjection\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2-11\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Diameter\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollet Nut Diameter\u003c\/strong\u003e: 1.44 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex Diameter\u003c\/strong\u003e: 1.44 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTIR\u003c\/strong\u003e: 0.001 inches (0.025 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced To\u003c\/strong\u003e: 20,000 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Type\u003c\/strong\u003e: Through-Spindle and DIN Flange\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112808\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 771812\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51728097313074,"sku":"771812","price":217.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f51bf20b067492ff60a4909e9e56733e.jpg?v=1788687903","url":"https:\/\/voomisupply.com\/products\/accupro-771812-double-angle-collet-chuck-cat40","provider":"Voomi Supply","version":"1.0","type":"link"}