{"product_id":"accupro-62760681-taper-length-drill-bit-1-16-in-carbide","title":"Accupro 62760681 Taper Length Drill Bit 1\/16 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 62760681 is a solid carbide taper length drill bit engineered for precision drilling in demanding machining environments. Built from solid carbide stock, it delivers the rigidity and wear resistance needed for consistent, repeatable hole quality in hard and abrasive materials. The bit features a 140-degree split point angle that reduces walking and improves centering on entry. At 0.0625 inches (1\/16 inch) in diameter with a 0.547-inch flute length and an overall length of 2.992 inches, this is a compact, high-performance tool suited for close-tolerance work. A coolant-through design supports chip evacuation and heat management during extended cuts. Licensed machinists and CNC operators are the primary users of this tool.\u003c\/p\u003e\u003cp\u003eThis drill bit is well suited for production machining, job shop operations, and precision fabrication where small-diameter holes are required in hardened steel, stainless steel, cast iron, titanium, and other difficult-to-machine alloys. The 7xD flute-length-to-diameter ratio provides extended reach relative to the bit diameter without sacrificing stiffness. The straight shank with a 3.00 mm shank diameter fits standard collet and chuck systems used in CNC machining centers and bench drill presses.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n\u003cli\u003eAlTiN coating improves heat resistance and extends tool life at high cutting speeds\u003c\/li\u003e\n\u003cli\u003e140-degree point angle reduces drill walk and improves entry accuracy\u003c\/li\u003e\n\u003cli\u003eCoolant-through design aids chip evacuation and thermal control\u003c\/li\u003e\n\u003cli\u003e7xD flute-length-to-diameter ratio allows deeper hole reach\u003c\/li\u003e\n\u003cli\u003eStraight shank compatible with standard collet and chuck systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard straight-shank collets and drill chucks on CNC machining centers, knee mills, and bench drill presses accepting a 3.00 mm shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of this tool should be performed by qualified machinists familiar with cutting tool setup and machine operation. Ensure the spindle is fully stopped and the machine is locked out before changing tooling. Verify collet or chuck runout before use, as excessive runout at this diameter will accelerate tool wear and reduce hole quality. Follow the machine manufacturer and tooling guidelines for appropriate feed rates and spindle speeds for the workpiece material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.0625 inches (1\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.547 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 2.992 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length to Diameter Ratio\u003c\/strong\u003e: 7xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 62760681\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51729227383090,"sku":"62760681","price":109.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7a54b4bd1b876e18c8a425ca77615524_da379f17-e27b-48ef-98fa-86d32519a5b1.jpg?v=1788702061","url":"https:\/\/voomisupply.com\/products\/accupro-62760681-taper-length-drill-bit-1-16-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}