{"product_id":"accupro-530-mg-single-point-tool-bit-3-4-in-carbide","title":"Accupro 530-MG Single Point Tool Bit 3\/4 in Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 530-MG is a single point tool bit designed for precision turning and chamfering operations on metalworking lathes. Built with a micrograin solid carbide tip brazed to the shank, this tool bit delivers consistent cutting performance on hardened and abrasive workpiece materials. The neutral cutting direction suits straight-plunge and facing passes without preferential left or right hand bias. The pointed nose geometry and 80-degree included angle make it a go-to choice for chamfering and contour work where a sharp, defined cutting edge is required. Weighing 0.05 pounds, the 530-MG is compact and easy to set up in a standard tool holder.\u003c\/p\u003e\u003cp\u003eThe 530-MG is suited for manual and CNC lathe applications where chamfering, facing, or pointed-profile turning is performed. The D-style tool bit profile (Industry Standard D-12) fits tool holders designed to accept that form factor. Typical users include machinists and tool-and-die professionals working with steel, cast iron, and similar ferrous or non-ferrous materials that benefit from carbide cutting edges over high-speed steel alternatives.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide tip for extended edge life on hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eNeutral cutting direction for straight plunge, facing, and chamfering passes\u003c\/li\u003e\n\u003cli\u003ePointed nose geometry with 80-degree included angle for clean chamfer profiles\u003c\/li\u003e\n\u003cli\u003eD-style profile per Industry Standard D-12 for consistent holder fitment\u003c\/li\u003e\n\u003cli\u003e1\/32 inch nose radius for controlled edge geometry\u003c\/li\u003e\n\u003cli\u003e3\/4 inch shank width and height for rigid tool holder seating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit tool bit for D-style single point tool holders accepting a 3\/4 inch shank cross-section per Industry Standard D-12.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by licensed or qualified machinists using a lathe tool post or turret holder designed for the D-12 shank profile. Ensure the machine spindle is fully powered down and the chuck is secured before seating or adjusting the tool bit. Set tool height to centerline using a reference gauge before making cuts. Do not exceed the feed and speed parameters recommended for the workpiece material and carbide grade in use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Micrograin Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Bit Style\u003c\/strong\u003e: D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: D-12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Type\u003c\/strong\u003e: Pointed Nose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 0.03125 inches (1\/32 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Application\u003c\/strong\u003e: Chamfering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 530-MG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51738026049842,"sku":"530-MG","price":43.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eb54dee322c87f60c931cf2ebfaa9f7c.jpg?v=1788795722","url":"https:\/\/voomisupply.com\/products\/accupro-530-mg-single-point-tool-bit-3-4-in-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}