{"product_id":"accupro-520-mg-single-point-tool-bit-1-2-inch-carbide","title":"Accupro 520-MG Single Point Tool Bit 1\/2 Inch Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 520-MG is a single point tool bit ground from micrograin solid carbide and configured for neutral cutting direction. It carries a D-style geometry with a pointed nose profile and an 80-degree included angle, making it well suited for chamfering operations on a lathe or manual turning center. The shank measures 1\/2 inch wide by 1\/2 inch tall, and the overall length is 3-1\/2 inches. The 1\/32 inch nose radius delivers a controlled finish at the tip. At 0.05 pounds, it is a compact, dense insert-style bit intended for precision work.\u003c\/p\u003e\n\u003cp\u003eThis tool bit is used in manual and CNC turning applications where chamfering, angular profiling, or pointed-nose contouring is required. The neutral cutting direction makes it adaptable to both right-hand and left-hand setups depending on how it is oriented in the tool holder. Machinists, toolroom operators, and maintenance technicians working with steel, cast iron, aluminum, and similar materials will find this geometry appropriate for standard production and prototype chamfer work. The micrograin carbide grade offers fine grain structure for edge stability at moderate to high surface speeds.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide tip for edge retention and wear resistance\u003c\/li\u003e\n  \u003cli\u003eD-style pointed nose profile with 80-degree included angle for chamfering\u003c\/li\u003e\n  \u003cli\u003eNeutral cutting direction for flexible left or right setup orientation\u003c\/li\u003e\n  \u003cli\u003e1\/32 inch nose radius for controlled tip geometry\u003c\/li\u003e\n  \u003cli\u003e1\/2 inch square shank fits standard tool holders and boring bars\u003c\/li\u003e\n  \u003cli\u003e3-1\/2 inch overall length for reach in typical turning setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use single point tool bit for standard 1\/2 inch square shank tool holders used in manual lathes and turning centers. Industry standard number D-8.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eTool bit installation should be performed by a qualified machinist following shop safety procedures and machine tool manufacturer guidelines. Secure the shank firmly in the tool holder with the cutting edge set at the correct center height before beginning any cut. Ensure the machine spindle is fully stopped and the power is locked out before adjusting or replacing the bit. Do not exceed the recommended surface speed for the carbide grade and workpiece material combination.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Micrograin Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Style\u003c\/strong\u003e: D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Type\u003c\/strong\u003e: Pointed Nose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 80 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Application\u003c\/strong\u003e: Chamfering\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Length\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 1\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: D-8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 520-MG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51748498506034,"sku":"520-MG","price":21.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/91fedf723693b3b450e459430423548e.jpg?v=1788894486","url":"https:\/\/voomisupply.com\/products\/accupro-520-mg-single-point-tool-bit-1-2-inch-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}