{"product_id":"accupro-35375-corner-chamfer-end-mill-4-flute-0-625-in","title":"Accupro 35375 Corner Chamfer End Mill 4 Flute 0.625 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 35375 is a corner chamfer end mill designed for precision chamfering and edge-breaking operations on metal workpieces. Built from powdered metal (PM) with a bright\/uncoated finish, this tool delivers solid wear resistance in general-purpose milling applications. It runs a 0.625-inch diameter with a 3.125-inch length of cut (LOC) and a 5.25-inch overall length (OAL), giving machinists adequate reach for most standard setups. The 4-flute, right-hand cutting configuration with a 30-degree helix angle promotes efficient chip evacuation and smooth surface finishes. Centercutting capability allows direct plunge entry without a pre-drilled starting hole.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for job shop and production environments where chamfering, deburring, and edge preparation are routine operations. It is appropriate for use on steel, cast iron, and similar ferrous materials at moderate cutting speeds. The 5\/8-inch shank diameter fits standard ER and side-lock toolholders commonly found on vertical machining centers and manual mills. Fine pitch classification and right-hand flute direction make it well-matched to standard CNC and manual milling setups that require consistent, repeatable chamfer geometry.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePowdered metal construction for improved toughness and wear resistance versus standard HSS\u003c\/li\u003e\n  \u003cli\u003e4-flute, right-hand cut with 30-degree helix for smooth chip flow and finish quality\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish suitable for general-purpose ferrous applications\u003c\/li\u003e\n  \u003cli\u003eFine pitch designation for improved surface finish on lighter cuts\u003c\/li\u003e\n  \u003cli\u003e5\/8-inch shank diameter fits widely available standard toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use corner chamfer end mill for standard 5\/8-inch shank toolholding systems on vertical machining centers and manual milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist familiar with cutting tool setup and machine operation. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Secure the shank to the specified torque range for the toolholder in use per the toolholder manufacturer guidelines, and verify runout with a dial indicator before beginning a cut. Do not exceed the tool manufacturer recommended speeds and feeds for the workpiece material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 3.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 5.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Fine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdered Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 35375\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51729523966258,"sku":"35375","price":101.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9a79e6e8dc9768e6ddc89499fd32a918.jpg?v=1788705674","url":"https:\/\/voomisupply.com\/products\/accupro-35375-corner-chamfer-end-mill-4-flute-0-625-in","provider":"Voomi Supply","version":"1.0","type":"link"}