{"product_id":"accupro-35316-corner-chamfer-end-mill-0-5-in-4-flute","title":"Accupro 35316 Corner Chamfer End Mill 0.5 in 4 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 35316 is a corner chamfer end mill designed for precise chamfering and edge-breaking operations on metal workpieces. Built from powdered metal with a bright\/uncoated finish, it offers a 0.5 inch cutting diameter and a 2 inch length of cut (LOC), making it well suited for moderate-depth chamfering passes. The 4-flute configuration supports improved surface finish and chip evacuation compared to 2-flute designs. With a 4 inch overall length (OAL) and a 0.5 inch shank diameter, the tool mounts securely in standard end mill holders. A 30-degree helix angle balances cutting efficiency with stability across a range of ferrous and non-ferrous materials.\u003c\/p\u003e\u003cp\u003eThis end mill is used in machine shops and manufacturing environments for chamfering edges, deburring, and angled profile work on milled parts. The centercutting geometry allows plunge entry into the workpiece, adding versatility for interpolated operations. It is appropriate for use on CNC machining centers and manual knee mills where a right-hand cutting, right-hand flute tool is specified. Typical applications include chamfering bolt holes, preparing weld joints, and breaking sharp edges on finished components in both prototype and production runs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCorner chamfer geometry for consistent edge-breaking and angled surface work\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry into the workpiece\u003c\/li\u003e\n\u003cli\u003e4-flute configuration improves surface finish and chip flow\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle balances cutting force and tool stability\u003c\/li\u003e\n\u003cli\u003ePowdered metal construction provides good wear resistance for general-purpose machining\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish suitable for use with or without cutting fluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 0.5 inch shank end mill compatible with conventional end mill holders, collet chucks, and tool holders accepting a 0.5 inch shank on CNC machining centers and manual mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool holder is clean and free of debris before securing the end mill. Use a calibrated torque wrench when tightening set screws or collet nuts to manufacturer specifications for the holder in use. Verify runout with a dial indicator after installation before beginning any cutting operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Powdered Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 35316\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51750642450738,"sku":"35316","price":56.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/eb4f425832c44ed8da5f79315efffb59.jpg?v=1788917678","url":"https:\/\/voomisupply.com\/products\/accupro-35316-corner-chamfer-end-mill-0-5-in-4-flute","provider":"Voomi Supply","version":"1.0","type":"link"}