{"product_id":"accupro-313401-square-end-mill-5-8-in-2-flute-solid-carbide","title":"Accupro 313401 Square End Mill 5\/8 in 2 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 313401 is a solid carbide square end mill designed for high-performance milling in ferrous and non-ferrous materials. It features a 5\/8 inch cutting diameter, a 2-3\/4 inch length of cut, and a 5 inch overall length with a matching 5\/8 inch shank diameter. The ZrN (zirconium nitride) coating reduces friction and improves wear resistance, while the 45-degree helix angle promotes efficient chip evacuation and smooth cutting action. With 2 flutes in a spiral configuration, this end mill is suited for slotting, profiling, and peripheral milling operations. It is centercutting, allowing plunge entry without a pre-drilled hole. Installed by machinists and CNC operators in job shops, toolrooms, and production environments.\u003c\/p\u003e\n\u003cp\u003eThe 313401 is appropriate for milling operations on steel, stainless steel, cast iron, aluminum, and similar workpiece materials where a long-reach, large-diameter carbide end mill is required. The right-hand cut and right-hand flute geometry is the standard configuration for conventional CNC machining centers and manual knee mills. The micrograin carbide substrate provides the hardness and toughness needed for interrupted cuts and demanding material removal applications. This tool is a single-end design, meaning it is reground or replaced when worn rather than flipped.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eZrN coating reduces friction and extends tool life in ferrous materials\u003c\/li\u003e\n  \u003cli\u003e45-degree helix angle promotes smooth chip flow and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eCentercutting design permits direct plunge milling without pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute — standard orientation for CNC and manual mills\u003c\/li\u003e\n  \u003cli\u003eSpiral flute geometry with 2 flutes optimized for slotting and profiling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard 5\/8 inch shank square end mill compatible with ER collet chucks, side-lock holders, and shrink-fit toolholders accepting a 5\/8 inch straight shank on CNC machining centers and manual vertical mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists using an appropriate toolholder sized for a 5\/8 inch shank; ensure the toolholder and spindle are clean and free of chips before seating the tool. Power down and lock out the machine spindle before inserting or removing any end mill. Verify runout with a dial indicator after clamping to confirm proper seating and minimize premature tool wear. Follow machine manufacturer torque specifications for collet nuts and set screws.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/8 inch (0.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2-3\/4 inches (2.75 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/8 inch (0.625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: ZrN (Zirconium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.0004 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.65 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 313401\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51734703702322,"sku":"313401","price":259.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b0b19cbedf829d3a57cccd261667d234.jpg?v=1788765349","url":"https:\/\/voomisupply.com\/products\/accupro-313401-square-end-mill-5-8-in-2-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}