{"product_id":"accupro-313166-corner-radius-end-mill-3-8-in-solid-carbide","title":"Accupro 313166 Corner Radius End Mill 3\/8 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 313166 is a single-end, corner radius end mill designed for precision milling operations in ferrous and non-ferrous materials. Built from micrograin solid carbide, it delivers rigidity and edge retention under demanding cutting conditions. The tool carries a ZrN (zirconium nitride) coating that reduces friction and extends tool life in high-speed applications. With a 0.0200 inch corner radius, it produces a controlled radius blend at the base of milled features, reducing stress concentrations in finished parts. The 45-degree helix promotes smooth chip evacuation and reduces cutting forces. Licensed machinists and CNC operators working in job shop or production environments are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill suits vertical machining centers and CNC mills where accurate floor-to-wall transitions are required. The centercutting design allows plunge entry, giving operators flexibility in toolpath programming without a separate drill operation. The 3\/8 inch shank seats directly in standard ER collet chucks, end mill holders, or shrink-fit tooling at that bore size. It is appropriate for profiling, slotting, and ramping operations in steel, stainless, aluminum, and similar materials where a controlled corner radius is specified on the workpiece drawing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide construction for high rigidity and extended edge life\u003c\/li\u003e\n\u003cli\u003eZrN coating reduces friction and improves wear resistance in high-speed cuts\u003c\/li\u003e\n\u003cli\u003e0.0200 inch corner radius produces consistent radius blends on milled floors and walls\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry enables direct plunge entry without a pilot hole\u003c\/li\u003e\n\u003cli\u003e45-degree helix angle promotes efficient chip evacuation and reduced cutting pressure\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute spiral — compatible with standard spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard 3\/8 inch shank corner radius end mill for use in CNC machining centers and manual mills equipped with collet chucks, end mill holders, or shrink-fit toolholding at 3\/8 inch bore diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Confirm the spindle is fully stopped and the machine is in a locked or safe state before changing tooling. Seat the shank to the full recommended gauge length in the holder and torque the retention mechanism per the toolholder manufacturer specification. Inspect the corner radius and cutting edges for chips or coating damage before first use; a damaged edge should not be run.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.5000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0200 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Micrograin Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: ZrN (Zirconium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 45 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.002000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: +0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 313166\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51755911840050,"sku":"313166","price":79.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/59bd47835bd8dbadecbd3621ebabb8c0.jpg?v=1788961499","url":"https:\/\/voomisupply.com\/products\/accupro-313166-corner-radius-end-mill-3-8-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}