{"product_id":"accupro-311890-square-end-mill-1in-5-flute-solid-carbide","title":"Accupro 311890 Square End Mill 1in 5 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 311890 is a 5-flute solid carbide square end mill designed for high-performance milling in demanding machining environments. With a 1 inch cutting diameter and a 2-5\/8 inch length of cut, it handles deep slotting, profiling, and finishing passes where rigidity and tool life matter. The 38-degree helix angle promotes efficient chip evacuation and reduces cutting forces. An AlTiCrN coating provides high-temperature oxidation resistance, making this end mill well suited for hardened steels, stainless, and high-temp alloys. The variable index geometry helps suppress chatter during aggressive cuts.\u003c\/p\u003e\u003cp\u003eThis end mill fits standard CNC machining center setups and manual mills using ER or side-lock holders with a 1 inch bore. It is a single-end, right-hand cut, right-hand spiral tool from the ACCUPRO HS Series. Typical applications include die and mold work, aerospace component profiling, and general precision metalworking shops running ferrous and exotic materials. It is center-cutting, allowing direct plunge entry. No extended reach configuration is used on this tool, keeping deflection minimal at full depth.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5-flute geometry increases feed rates and improves surface finish over 4-flute alternatives\u003c\/li\u003e\n\u003cli\u003eAlTiCrN coating delivers oxidation resistance and extended tool life in high-heat applications\u003c\/li\u003e\n\u003cli\u003e38-degree helix angle promotes smooth chip flow and reduced radial cutting forces\u003c\/li\u003e\n\u003cli\u003eVariable index spacing reduces harmonic chatter during aggressive milling passes\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate provides superior hardness and edge retention\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge milling without pre-drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and manual mills with 1 inch bore toolholders, including ER collet chucks and Weldon side-lock holders. Part of the ACCUPRO HS Series of solid carbide end mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and the machine is in an e-stop or lockout state before changing tooling. Seat the shank to the minimum recommended insertion depth per the toolholder manufacturer guidelines, and verify runout with a dial indicator before beginning a cut. Do not exceed the toolholder manufacturer rated RPM for this shank diameter.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch (25.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2-5\/8 inches (66.68 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiCrN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 311890\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51732884554034,"sku":"311890","price":574.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a8254d0ae7b10182ca163db3aac307e6_14c82106-e104-46c3-be0e-15fe2b7bfdfd.jpg?v=1788748044","url":"https:\/\/voomisupply.com\/products\/accupro-311890-square-end-mill-1in-5-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}