{"product_id":"accupro-311642-corner-radius-end-mill-1-2-in-5-flute","title":"Accupro 311642 Corner Radius End Mill 1\/2 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 311642 is a single-end, corner radius end mill ground from solid micrograin carbide and coated with AlCrTiN for extended tool life in demanding milling applications. It measures 1\/2 inch in diameter with a 1-1\/4 inch length of cut and a 3 inch overall length. The 5-flute geometry with a 38-degree helix and variable index spacing promotes smooth chip evacuation and reduced chatter. The 0.060 inch corner radius protects the cutting edge at the transition zone, extending service intervals compared to sharp-corner end mills. Centercutting capability allows plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for finishing and semi-finishing passes on ferrous alloys, hardened steels, and high-temperature alloys where heat resistance and edge retention are priorities. The right-hand flute direction and right-hand cutting orientation are standard for conventional CNC machining center spindles. The 1\/2 inch shank diameter fits standard ER collets, shrink-fit holders, and hydraulic chucks commonly found in vertical and horizontal machining centers used in production and job shop environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlCrTiN coating provides high oxidation resistance and hardness for dry or minimum-quantity lubrication cutting\u003c\/li\u003e\n\u003cli\u003eSolid micrograin carbide substrate delivers rigidity and wear resistance across the full length of cut\u003c\/li\u003e\n\u003cli\u003e5-flute, variable index design reduces harmonic vibration during high-feed finishing passes\u003c\/li\u003e\n\u003cli\u003e0.060 inch corner radius extends tool life by distributing cutting forces away from a sharp corner\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry permits direct plunge milling without a starter hole\u003c\/li\u003e\n\u003cli\u003e38-degree helix angle promotes efficient chip flow and smooth surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement for 1\/2 inch shank corner radius end mills in standard ER, shrink-fit, or hydraulic milling tool holders. Confirm holder bore tolerance and runout spec before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes must be performed with the machine spindle fully stopped and the control in a safe state per shop lockout\/tagout procedures. Seat the shank to the full recommended insertion depth in the holder and torque the collet nut or set screw to the holder manufacturer specification. Inspect the corner radius and cutting edges for chips before each use. Handle carbide tooling with care to avoid impact damage to the cutting edge or corner radius.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/4 inches (1.2500 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches (3.0000 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (12.70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.060 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlCrTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.001000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 311642\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51752597160242,"sku":"311642","price":148.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d6bd4d66c375df19549ddcbf21fe985a.jpg?v=1788929285","url":"https:\/\/voomisupply.com\/products\/accupro-311642-corner-radius-end-mill-1-2-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}