{"product_id":"accupro-311469-corner-radius-end-mill-1-4-in-5-flute","title":"Accupro 311469 Corner Radius End Mill 1\/4 in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 311469 is a solid carbide corner radius end mill designed for precision milling in ferrous and hardened materials. With a 1\/4 inch diameter and a 0.030 inch corner radius, this single-end, five-flute tool delivers smooth corner blending and reduced stress concentration at part edges. The AlCrTiN coating provides high-temperature oxidation resistance and extended tool life in demanding cutting environments. A 38-degree helix angle promotes efficient chip evacuation, and the variable index flute spacing reduces harmonic vibration during cut. This tool is installed by machinists and CNC operators working in job shops, production facilities, and tool rooms.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for finishing and semi-finishing operations in steel, stainless steel, cast iron, and similar materials where corner radius geometry is required. The 1-1\/4 inch length of cut accommodates moderate-depth side milling and profiling passes. The 1\/4 inch shank fits standard ER collet chucks and end mill holders commonly found on vertical machining centers and CNC mills. Centercutting capability allows plunge entry directly into the workpiece without a pre-drilled pilot hole.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlCrTiN coating for high-heat and oxidation resistance in hard materials\u003c\/li\u003e\n  \u003cli\u003e5-flute design increases feed rate potential compared to 4-flute equivalents\u003c\/li\u003e\n  \u003cli\u003e0.030 inch corner radius reduces edge chipping and stress risers on finished parts\u003c\/li\u003e\n  \u003cli\u003eVariable index flute spacing dampens chatter during aggressive cuts\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge milling without a starter hole\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1\/4 inch ER collet chucks, shrink-fit holders, or end mill holders on CNC vertical machining centers and manual mills requiring a corner radius end mill with a 1\/4 inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or CNC operator. Power down and lock out the spindle before loading or changing tooling. Seat the shank fully in the collet or holder and torque the retention nut to the tool holder specification before running. Inspect the cutting edges and coating for chips or wear before each setup, and verify runout with a dial indicator after clamping.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-1\/4 inches (1.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches (76.2 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/4 inch (6.35 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.030 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlCrTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.001000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 311469\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51733680161074,"sku":"311469","price":81.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7ec7a4040ec1f4a580871feb93faaf21.jpg?v=1788758024","url":"https:\/\/voomisupply.com\/products\/accupro-311469-corner-radius-end-mill-1-4-in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}