{"product_id":"accupro-14883551-square-end-mill-0-025-in-3-flute-carbide","title":"Accupro 14883551 Square End Mill 0.025 in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 14883551 is a solid carbide square end mill designed for precision milling operations in metalworking and machining applications. With a 0.025-inch cutting diameter and a 3-flute geometry, this end mill delivers fine detail cutting in tight-tolerance work. The 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. The bright, uncoated finish makes it well suited for non-ferrous metals, plastics, and other materials where coating adhesion or heat buildup is not a primary concern. Machined from micrograin carbide, the tool offers rigidity and wear resistance at this miniature diameter. It is a single-end tool and is centercutting, allowing plunge entry into workpiece material.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for CNC machining centers, benchtop mills, and manual milling machines where small-diameter, high-precision cuts are required. Typical applications include micro-slot milling, engraving, fine contouring, and detail work on parts with tight geometric tolerances. The 0.025-inch diameter makes it appropriate for work in electronics, mold and die, medical components, and aerospace detail parts. Right-hand cut and right-hand flute direction are standard for conventional and climb milling setups. The 1\/8-inch shank diameter is compatible with standard collets and end mill holders found on most light-duty and precision CNC platforms.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.025-inch cutting diameter with a mill diameter tolerance of +0.0000 \/ -0.0010 inches for close-tolerance work\u003c\/li\u003e\n  \u003cli\u003e3-flute spiral geometry with a 30-degree helix angle for efficient chip flow\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide construction for rigidity and edge retention at miniature scale\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suited for non-ferrous metals, plastics, and general-purpose milling\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard milling setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard single-end square end mill with a 1\/8-inch shank diameter, compatible with ER collets, end mill holders, and tooling chucks sized for 1\/8-inch shank tooling on CNC and manual milling equipment.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the shank fully within the collet or end mill holder to the manufacturer-specified minimum insertion depth before tightening. At 0.025-inch diameter, the tool is highly susceptible to breakage from side load, vibration, or excessive feed rate — confirm feed and speed parameters before running. Inspect the cutting edges under magnification before each use; replace immediately if chipping or wear is detected.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Bright \/ Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14883551\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51751062307122,"sku":"14883551","price":38.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ffe1b4a8f6ecff1f9553de5f764632bc.jpg?v=1788921461","url":"https:\/\/voomisupply.com\/products\/accupro-14883551-square-end-mill-0-025-in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}