{"product_id":"accupro-14797220-square-end-mill-0-06-in-3-flute-altin","title":"Accupro 14797220 Square End Mill 0.06 in 3 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 14797220 is a solid carbide square end mill designed for precision milling in demanding metal-cutting applications. Built from micrograin carbide stock and coated with AlTiN (aluminum titanium nitride), this tool delivers extended tool life and heat resistance at elevated cutting speeds. It runs a 0.06-inch mill diameter with a 3\/32-inch (0.0900 inch) length of cut and a 1\/8-inch shank diameter. The 30-degree right-hand helix promotes efficient chip evacuation. Three flutes provide a balance of chip clearance and edge strength suited to finishing and light roughing passes. Centercutting geometry allows plunge entry. Installed by machinists and tool-and-die professionals on CNC machining centers and manual mills.\u003c\/p\u003e\u003cp\u003eThis end mill is sized for small-feature work: slots, pockets, and contour passes in ferrous and non-ferrous alloys, stainless steels, hardened steels, and cast iron where AlTiN coating performance is required. The extended-reach configuration, with a 0.3120-inch neck length and 0.1800-inch reach length, provides clearance when milling deep features relative to the tool diameter. The 2.5-inch overall length fits standard ER and straight-shank collet toolholders with a 1\/8-inch bore. Single-end construction means the tool is replaced rather than reversed when worn.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlTiN coating provides high heat resistance and oxidation resistance for dry and semi-dry cutting in ferrous alloys\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and edge retention at small diameters\u003c\/li\u003e\n\u003cli\u003e3-flute geometry balances chip room and cutting edge count for small-diameter finishing work\u003c\/li\u003e\n\u003cli\u003e30-degree right-hand spiral helix for positive chip evacuation\u003c\/li\u003e\n\u003cli\u003eCentercutting design supports direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003eExtended-reach neck geometry allows access to recessed features without tool deflection buildup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct application fit for CNC machining centers and manual mills accepting a 1\/8-inch straight shank; part of the ACCUPRO ASQSC3-AT-CCER series of AlTiN-coated square end mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or qualified CNC operator should install this tool in a clean, properly sized 1\/8-inch collet or endmill holder, torquing to the toolholder manufacturer specification. Ensure the spindle is fully stopped and the machine is in an e-stop or lockout state before changing tooling. Inspect the collet bore and shank for contamination or wear before seating; a worn collet can induce runout that will break tools at this diameter. Do not exceed the recommended depth-of-cut for the diameter — consult published feeds-and-speeds data for the specific workpiece material and coating type.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0600 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.0900 inches (3\/32 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.3120 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.1800 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: ASQSC3-AT-CCER\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14797220\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51730526601522,"sku":"14797220","price":54.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bac01a09d7f1b97c9b441adf11831fac.jpg?v=1788719004","url":"https:\/\/voomisupply.com\/products\/accupro-14797220-square-end-mill-0-06-in-3-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}