{"product_id":"accupro-14797176-square-end-mill-0-035in-3-flute-carbide","title":"Accupro 14797176 Square End Mill 0.035in 3 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 14797176 is a solid carbide square end mill designed for precision milling operations in metal, composites, and engineering plastics. With a 0.035-inch cutting diameter and a 0.052-inch length of cut, this tool is built for tight-tolerance work in confined geometries and fine-detail applications. The three-flute, right-hand spiral configuration with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. At 2.5 inches overall length with a 1\/8-inch shank diameter, it fits standard collet toolholding systems common on CNC machining centers and manual mills. Micrograin carbide construction delivers hardness and wear resistance at small diameters where tool deflection is a primary concern.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for high-precision milling tasks where small-diameter tooling is required, including slotting, profiling, and pocketing in die and mold work, medical component machining, electronics fabrication, and aerospace detail parts. The bright, uncoated finish makes it appropriate for non-ferrous metals and materials where coating adhesion or heat buildup is a secondary concern. The extended-reach geometry and 0.28-inch reach length allow access to features that standard-length tools cannot reach. Center-cutting capability allows plunge entry without pre-drilled pilot holes.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.035-inch cutting diameter with a mill diameter tolerance of +0.0000 \/ -0.0010 inches for consistent sizing\u003c\/li\u003e\n\u003cli\u003e3-flute right-hand spiral design with a 30-degree helix angle for efficient chip flow\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide construction for rigidity and wear resistance at small diameters\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable — allows direct plunge entry\u003c\/li\u003e\n\u003cli\u003eExtended reach geometry with a 0.28-inch reach length for access to deep or confined features\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for non-ferrous metals and plastics\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement or standard tooling selection for CNC machining centers, manual knee mills, and rotary tool setups using 1\/8-inch collets or ER-style toolholding compatible with a 0.125-inch shank diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Ensure the machine spindle is fully stopped and the control is in an E-stop or tool-change state before loading or removing tooling. Verify collet size matches the 0.125-inch shank diameter and that the tool is seated to the recommended gauge-line depth for the toolholder in use. At this diameter, avoid excessive runout in the spindle and toolholder, as small-diameter carbide tools are sensitive to deflection and breakage under off-center loading.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.052 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.28 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.014 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14797176\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51735527817522,"sku":"14797176","price":46.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1614a89f28b6c57e3ea3c92071917a9c.jpg?v=1788772872","url":"https:\/\/voomisupply.com\/products\/accupro-14797176-square-end-mill-0-035in-3-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}