{"product_id":"accupro-14797175-square-end-mill-0-035-in-3-flute-altin","title":"Accupro 14797175 Square End Mill 0.035 in 3 Flute Altin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 14797175 is a solid carbide square end mill designed for precision milling in demanding machining environments. With a 0.035-inch cutting diameter and a 0.052-inch length of cut, this tool is built for tight-tolerance work in small-feature applications. The three-flute, right-hand spiral geometry with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. An AlTiN coating adds heat and wear resistance, extending tool life in harder workpiece materials. The micrograin carbide substrate provides the rigidity and edge retention required for repeatable results in production and prototype machining alike. This end mill is single-end and center-cutting, allowing plunge entry where the application calls for it.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for small-feature milling operations including slots, pockets, and profiles in ferrous and non-ferrous metals, hardened steels, and high-temperature alloys. The extended-reach design, with a 0.187-inch reach length and a 1\/8-inch shank diameter, makes it appropriate for accessing recessed features or deep cavities where clearance is limited. It is a common choice in CNC machining centers, tool rooms, and precision job shops handling close-tolerance components. Machinists and CNC operators working on aerospace, medical, and mold-and-die applications will find the AlTiN coating and micrograin carbide well matched to those material requirements.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.035-inch cutting diameter with mill diameter tolerance of +0.0000 \/ -0.0010 inches for consistent sizing\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and sharp edge retention\u003c\/li\u003e\n\u003cli\u003e30-degree right-hand helix with spiral flutes for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable, allowing direct plunge entry\u003c\/li\u003e\n\u003cli\u003eExtended reach with 0.187-inch reach length for accessing deep or recessed features\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and manual mills with a 1\/8-inch collet or end mill holder. The 1\/8-inch shank diameter fits standard ER11, ER16, and similarly sized collet systems commonly used with miniature tooling setups.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the machine spindle is fully stopped and the control is in a safe state before tooling changes. Use a properly sized collet that matches the 0.125-inch shank diameter and torque the collet nut to the tool holder manufacturer specification. At this diameter, tool runout has a significant effect on tool life and surface finish, so check runout after installation and before cutting.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.035 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.052 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut Range\u003c\/strong\u003e: 0.000 - 0.100 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.187 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.014 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14797175\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51727807283506,"sku":"14797175","price":53.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4a41cbf8b22e80d1c1d09fe1747bfd4e.jpg?v=1788682742","url":"https:\/\/voomisupply.com\/products\/accupro-14797175-square-end-mill-0-035-in-3-flute-altin","provider":"Voomi Supply","version":"1.0","type":"link"}