{"product_id":"accupro-14797169-square-end-mill-1-32-in-3-flute-solid-carbide","title":"Accupro 14797169 Square End Mill 1\/32 in 3 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 14797169 is a single-end square end mill designed for precision milling in tight-tolerance applications. Built from micrograin solid carbide and coated with AlTiN (aluminum titanium nitride), it handles demanding materials including hardened steels, stainless, and high-temp alloys. The 1\/32 inch (0.0312 inch) cutting diameter and 0.046 inch length of cut make it well suited for fine detail work and micro-slot milling. With a 1\/8 inch shank diameter and 2-1\/2 inch overall length, it mounts in standard collet chucks and tool holders used across CNC machining centers and manual mills. Machinists, tool-and-die shops, and precision fabrication teams are the primary users.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for small-feature milling, micro-engraving, and slot work where a full-size end mill cannot access. The extended reach design (0.375 inch reach length) allows cutting in recessed pockets and stepped features. The 30-degree helix and spiral flute geometry support chip evacuation in both ferrous and non-ferrous materials. Centercutting capability allows plunge entry without a pre-drilled pilot hole. Right-hand cut and right-hand flute orientation are standard for conventional CNC spindle setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide construction for rigidity and edge retention at small diameters\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides heat resistance and reduces friction in dry or near-dry cutting\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eExtended reach of 0.375 inches for accessing recessed features\u003c\/li\u003e\n  \u003cli\u003e30-degree helix spiral flute promotes chip flow and reduces cutting forces\u003c\/li\u003e\n  \u003cli\u003eTight mill diameter tolerance of +0.0000 \/ -0.0010 inches for consistent finish dimensions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers, knee mills, and similar equipment accepting a 1\/8 inch shank via collet, end mill holder, or shrink-fit tooling. Suited for milling ferrous metals, stainless steel, high-temp alloys, and hard non-ferrous materials where an AlTiN coating and micrograin carbide substrate are appropriate.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. The machine spindle must be fully stopped and locked out before mounting or removing the tool. Seat the shank fully into the collet or tool holder to the minimum clamping depth recommended by the toolholder manufacturer to prevent deflection at this small diameter. At 1\/32 inch cutting diameter, tool runout tolerance is critical — verify holder and spindle runout before committing to production cuts.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0312 inches (1\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.046 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches (2-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin Grade\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14797169\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51738774241586,"sku":"14797169","price":54.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5943e2c9bd9688ed771b4f5fa439a07b.jpg?v=1788804283","url":"https:\/\/voomisupply.com\/products\/accupro-14797169-square-end-mill-1-32-in-3-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}