{"product_id":"accupro-14797071-square-end-mill-0-12in-4-flute-carbide","title":"Accupro 14797071 Square End Mill 0.12in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 14797071 is a solid carbide square end mill designed for precision milling operations in metal fabrication and machining environments. With a 0.12-inch cutting diameter and four right-hand spiral flutes, this single-end tool delivers clean, accurate cuts in ferrous and non-ferrous materials. The AlTiN (aluminum titanium nitride) coating extends tool life by improving heat resistance and reducing friction at the cutting edge. At 1.5 inches overall length with a 0.125-inch shank diameter and 30-degree helix angle, this end mill is built for tight-tolerance work where rigidity and edge sharpness are critical. Micrograin carbide substrate supports high cutting speeds and feeds on harder workpiece materials.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for profiling, slotting, and contouring operations on CNC machining centers and manual mills. Its compact 0.12-inch diameter and 0.18-inch length of cut make it well-suited for finishing passes in confined features, thin walls, and small-bore contours. The center-cutting geometry allows direct plunging where the application calls for it. Typical users include machinists and toolmakers working in job shops, production facilities, and precision component manufacturing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.12-inch cutting diameter with 0.18-inch length of cut for small-feature machining\u003c\/li\u003e\n\u003cli\u003e4 right-hand spiral flutes with 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life in hard materials\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable for direct plunge entry\u003c\/li\u003e\n\u003cli\u003eSingle-end design with 0.125-inch shank diameter for standard collet compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use end mill compatible with standard 1\/8-inch collets and tool holders on CNC machining centers and manual vertical mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the spindle is fully stopped and the machine is powered down before inserting or removing the tool. Secure the shank fully within the collet to the recommended engagement depth to prevent pullout under cutting loads. Verify runout at setup and confirm feed and speed parameters are appropriate for the workpiece material before cutting.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14797071\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51728091480370,"sku":"14797071","price":29.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d5c9a73e1286a4013574bf50b90b6cf6.jpg?v=1788687795","url":"https:\/\/voomisupply.com\/products\/accupro-14797071-square-end-mill-0-12in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}