{"product_id":"accupro-14796993-square-end-mill-0-014-in-2-flutes-carbide","title":"Accupro 14796993 Square End Mill 0.014 in 2 Flutes Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 14796993 is a square end mill designed for precision milling in tight-tolerance applications. Ground from micrograin solid carbide, this stub-length tool features a 0.014-inch cutting diameter and a 0.021-inch length of cut, making it well suited for micro-machining operations where rigidity and dimensional accuracy are critical. The 30-degree right-hand spiral flute geometry promotes efficient chip evacuation while maintaining cutting stability in small-feature work. With a bright, uncoated finish, this end mill is compatible with a wide range of ferrous and non-ferrous materials. It is single-end and centercutting, supporting both plunge and peripheral milling operations.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in CNC machining centers, vertical mills, and high-speed spindle applications requiring fine-detail work. Its stub-length configuration reduces deflection during cuts, making it appropriate for mold work, electronics component machining, medical device fabrication, and other applications demanding tight dimensional control. The 1\/8-inch shank diameter fits standard collets and tool holders common in small-diameter tooling setups. Machinists and toolroom professionals working with small-scale features will find this geometry suitable for slotting, profiling, and pocketing at micro scales.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide construction for high wear resistance and edge retention\u003c\/li\u003e\n  \u003cli\u003e0.014-inch cutting diameter with mill diameter tolerance of +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand helix for efficient chip evacuation in small-feature cuts\u003c\/li\u003e\n  \u003cli\u003eStub-length design minimizes deflection and improves rigidity in micro-milling\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry supports direct plunge entry into workpieces\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for a broad range of work materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard stub-length square end mill with a 1\/8-inch shank, compatible with collet chucks and tool holders accepting 0.125-inch shank diameters in CNC machining centers and manual vertical mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the spindle fully stopped and the machine in a safe, locked-out state. Ensure the collet or tool holder is clean and free of debris before seating the shank to maintain runout tolerances. At this diameter, even minor runout or improper seating can result in tool breakage or out-of-tolerance features. Verify spindle speed and feed rate recommendations for the specific work material before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.014 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.021 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14796993\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51731103973682,"sku":"14796993","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/065d19b2ab5dc4aadf042e7c56dc9049.jpg?v=1788727005","url":"https:\/\/voomisupply.com\/products\/accupro-14796993-square-end-mill-0-014-in-2-flutes-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}