{"product_id":"accupro-14796900-square-end-mill-0-025-in-2-flute-altin-carbide","title":"Accupro 14796900 Square End Mill 0.025 in 2 Flute Altin Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 14796900 is a solid micrograin carbide square end mill designed for precision milling in demanding machining environments. With a 0.025-inch cutting diameter and a 0.075-inch length of cut, this single-end tool is built for tight-tolerance work in ferrous and non-ferrous materials. The AlTiN (aluminum titanium nitride) coating improves heat resistance and extends tool life at elevated cutting speeds. Two spiral flutes with a 30-degree right-hand helix promote chip evacuation and reduce cutting forces. Machinists and tool-and-die professionals select this geometry for micro-milling, engraving, and detail work on CNC machining centers.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for precision work in production and prototype environments where fine-feature milling is required. The 0.125-inch shank diameter fits standard collet chucks commonly found on vertical and horizontal CNC machining centers. The regular-length profile and centercutting capability allow it to plunge as well as profile. Applications include slotting, contouring, and pocket milling in hardened steels, stainless alloys, titanium, and similar difficult-to-cut materials where AlTiN coating provides a thermal and wear advantage.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.025-inch cutting diameter with +0.0000 \/ -0.0010 inch diameter tolerance for tight-fit work\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003eSolid micrograin carbide construction for rigidity and edge retention at small diameters\u003c\/li\u003e\n\u003cli\u003e30-degree right-hand spiral flutes promote efficient chip evacuation in deep-feature cuts\u003c\/li\u003e\n\u003cli\u003eCentercutting design enables plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003e0.125-inch shank with -0.0001 \/ -0.0003 inch shank tolerance for secure collet grip\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard single-end square end mill with a 0.125-inch shank, compatible with collet systems and tool holders sized for 1\/8-inch shank tooling on CNC machining centers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety protocols. Ensure the spindle is fully stopped and the machine is in a safe state before loading or removing the tool. Seat the shank fully in a clean, undamaged collet to the recommended engagement depth before torquing the collet nut. At 0.025-inch diameter, this tool is highly susceptible to deflection and breakage — verify runout with a dial indicator and use conservative feed and speed parameters appropriate for the material and coating.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.025 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.075 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Micrograin Grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14796900\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51732807549234,"sku":"14796900","price":32.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7246405b0c2cf7b870d05e31555da00b.jpg?v=1788747047","url":"https:\/\/voomisupply.com\/products\/accupro-14796900-square-end-mill-0-025-in-2-flute-altin-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}