{"product_id":"accupro-14796233-corner-radius-end-mill-0-0469-in-3-flute","title":"Accupro 14796233 Corner Radius End Mill 0.0469 in 3 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 14796233 is a solid carbide corner radius end mill designed for precision milling in demanding metalworking applications. It features a 0.0469-inch mill diameter, a 0.0100-inch corner radius, and three right-hand spiral flutes with a 30-degree helix angle. The cutting edge is coated with AlTiN (aluminum titanium nitride), which provides heat resistance and extends tool life in ferrous and high-hardness materials. With a length of cut of 0.0700 inches and an overall length of 2.5 inches, this end mill belongs to the Miniature series and is intended for close-tolerance finish milling, profiling, and slot work in small-scale or tight-geometry applications. It is installed and operated by machinists and CNC programmers working with precision milling equipment.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for finish profiling, contouring, and corner-radius form milling in miniature or micro-scale workpieces. The extended reach design, with a reach length of 0.5700 inches, allows access to recessed features and deep cavities without interference. The centercutting geometry permits plunge entry as well as conventional peripheral cutting. It accepts a 0.125-inch (1\/8 inch) shank and fits standard collets and end mill holders of that bore size. Typical applications include mold and die work, precision aerospace components, and medical device machining where controlled corner geometry and surface finish are critical.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAlTiN coating for elevated heat resistance and extended tool life in hardened and ferrous materials\u003c\/li\u003e\n\u003cli\u003e0.0100-inch corner radius reduces stress concentrations and improves surface finish at part corners\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle with right-hand cutting and right-hand flute direction for smooth chip evacuation\u003c\/li\u003e\n\u003cli\u003eExtended reach geometry with 0.5700-inch reach length for access to recessed features\u003c\/li\u003e\n\u003cli\u003eCentercutting design allows direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n\u003cli\u003eMicrograin solid carbide substrate for rigidity and dimensional stability in tight-tolerance work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style miniature end mill compatible with standard 0.125-inch bore collets and end mill holders used in CNC machining centers and manual mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes must be performed with the machine spindle fully stopped and the control in an e-stop or locked-out state per applicable machine safety procedures. Seat the 0.125-inch shank fully into the collet or end mill holder and torque the retention nut to the tool holder manufacturer specification. Inspect the cutting edges and coating for chips or wear before use. Handle carbide tooling carefully to avoid edge chipping during setup.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0469 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0100 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.0700 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.5700 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.001000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Miniature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14796233\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51736888836402,"sku":"14796233","price":62.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/19f9de06d7aa139383c2859419d8969f.jpg?v=1788781571","url":"https:\/\/voomisupply.com\/products\/accupro-14796233-corner-radius-end-mill-0-0469-in-3-flute","provider":"Voomi Supply","version":"1.0","type":"link"}