{"product_id":"accupro-14796232-corner-radius-end-mill-0-0469-in-3-flute","title":"Accupro 14796232 Corner Radius End Mill 0.0469 in 3 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 14796232 is a solid carbide corner radius end mill engineered for precision machining in tight-tolerance applications. With a 0.0469-inch mill diameter and a 0.0100-inch corner radius, this tool removes material while reducing stress concentrations at part corners. The three-flute, right-hand spiral design promotes efficient chip evacuation and smooth cutting action. An AlTiN coating increases surface hardness and thermal resistance, extending tool life in ferrous and high-temperature alloy materials. The micrograin carbide substrate supports the fine geometry required for miniature-series work. This tool is installed and operated by machinists and CNC programmers in job shop, aerospace, medical, and precision manufacturing environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill suits small-feature milling operations where a miniature-diameter tool is required. The 0.0469-inch diameter and 1.25-inch length of cut make it appropriate for slot milling, profiling, and finishing passes on small components. The extended-reach design, with a 0.3750-inch reach length, allows access to recessed features without interference. A 1\/8-inch shank diameter fits standard ER collet chucks and miniature end mill holders common on CNC machining centers and high-speed spindles. Single-end configuration and centercutting geometry allow plunge entry where needed.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.0469-inch mill diameter with 0.0100-inch corner radius for precise edge blending\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for improved hardness, heat resistance, and extended tool life\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide substrate for rigidity in miniature-diameter applications\u003c\/li\u003e\n  \u003cli\u003eThree right-hand spiral flutes with 30-degree helix for efficient chip removal\u003c\/li\u003e\n  \u003cli\u003eExtended-reach design with 0.3750-inch reach length for recessed feature access\u003c\/li\u003e\n  \u003cli\u003eCentercutting, single-end configuration supports plunge and ramp entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and high-speed spindles equipped with 1\/8-inch collet chucks or miniature end mill holders. Suitable for ferrous metals, high-temperature alloys, and other materials compatible with AlTiN-coated tooling.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician. Secure the 1\/8-inch shank in a clean, properly sized collet or toolholder and torque to the holder manufacturer's specification. Verify runout at the cutting diameter before beginning production cuts. Follow all machine guarding and personal protective equipment requirements applicable to CNC milling operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0469 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0100 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.0700 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.3750 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000000 \/ -0.001000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Miniature\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14796232\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51749117198642,"sku":"14796232","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/02b6de5fb9ac01ffe1ed30c91718015f.jpg?v=1788902274","url":"https:\/\/voomisupply.com\/products\/accupro-14796232-corner-radius-end-mill-0-0469-in-3-flute","provider":"Voomi Supply","version":"1.0","type":"link"}