{"product_id":"accupro-14556485-ball-end-mill-0-5-in-4-flute-solid-carbide","title":"Accupro 14556485 Ball End Mill 0.5 in 4 Flute Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 14556485 is a solid carbide ball end mill designed for precision milling operations in ferrous and non-ferrous materials. Built from micrograin carbide stock, it features a 0.5-inch cutting diameter and a 2.0-inch length of cut, making it well suited for deep-cavity profiling and 3D contouring. The 40-degree helix angle promotes efficient chip evacuation and reduces cutting forces. An AlTiN+ coating provides thermal resistance and extended tool life in demanding cuts. This is a single-end, right-hand cut tool with right-hand flute direction. Machinists and toolroom professionals working with CNC machining centers install and use this tool type routinely.\u003c\/p\u003e\u003cp\u003eThis ball end mill is intended for milling applications where a full-radius tip profile is required, such as 3D contouring, profiling, and finishing passes in mold and die work, aerospace components, and general precision machining. The long-length designation and 2.0-inch length of cut allow reach into deeper pockets and cavities that standard-length end mills cannot access. The 0.5-inch shank diameter fits standard ER, shrink-fit, or side-lock toolholders commonly found in CNC machining centers and manual knee mills.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMicrograin solid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eAlTiN+ coating for heat resistance and extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003e40-degree helix angle promotes smooth chip flow and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003e2.0-inch length of cut for deep-cavity and long-reach milling applications\u003c\/li\u003e\n\u003cli\u003e4-flute spiral configuration balances material removal rate with finish quality\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction; single-end design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard-shank replacement ball end mill compatible with 0.5-inch bore toolholders, including ER collet chucks, shrink-fit holders, and side-lock holders used on CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Ensure the machine spindle is fully stopped and locked out before changing tooling. Verify toolholder bore cleanliness and proper seating depth before tightening to the toolholder manufacturer torque specification. Inspect the cutting edges for chips or damage before each use; do not run a damaged end mill.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Style\u003c\/strong\u003e: Medium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN+\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.000 \/ -0.002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0004 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.35 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14556485\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51750160892210,"sku":"14556485","price":184.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0306854d985374309c55abba4af1cdd5.jpg?v=1788913932","url":"https:\/\/voomisupply.com\/products\/accupro-14556485-ball-end-mill-0-5-in-4-flute-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}