{"product_id":"accupro-12277019-square-end-mill-0-01in-4-flute-carbide","title":"Accupro 12277019 Square End Mill 0.01in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe ACCUPRO 12277019 is a solid carbide square end mill designed for precision milling in demanding machining applications. With a 0.01 inch cutting diameter and a 0.015 inch length of cut, this tool is built for micro-milling work where dimensional accuracy is critical. The four-flute, right-hand spiral configuration provides efficient chip evacuation and a stable cut. Micrograin carbide construction delivers the hardness and wear resistance required for tight-tolerance work in ferrous and non-ferrous materials. The bright, uncoated finish makes it suitable for applications where coating adhesion or heat interaction is a concern.\u003c\/p\u003e\u003cp\u003eThis end mill is used in CNC machining centers and manual mills for micro-detail work, slotting, and profiling in tooling, mold, and die applications. Its 1\/8 inch shank diameter fits standard collets and tool holders common in precision machine shops. The 1.5 inch overall length keeps deflection low, which is especially important at this diameter. Single-end design means the tool is replaced when worn rather than indexed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.01 inch cutting diameter for micro-milling and fine-detail work\u003c\/li\u003e\n\u003cli\u003eSolid micrograin carbide construction for hardness and edge retention\u003c\/li\u003e\n\u003cli\u003e4-flute, right-hand spiral flute design for smooth cutting action\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle balances chip flow and cutting stability\u003c\/li\u003e\n\u003cli\u003eCentercutting capable — can plunge directly into material\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish suitable for a broad range of workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNC machining centers and precision manual mills accepting a 1\/8 inch collet or end mill holder. Suitable for micro-milling operations in tool steels, aluminum, and similar machinable materials where tight diameter tolerances are required.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following standard tooling procedures. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Seat the 1\/8 inch shank fully into the collet or tool holder and torque the retention system according to the tool holder manufacturer specifications. At 0.01 inch diameter, this tool is extremely fragile — handle with care, avoid side-loading during setup, and verify runout before cutting.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.01 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.015 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12277019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51752887681330,"sku":"12277019","price":34.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1c17662774b494e69503b92467335029.jpg?v=1788930843","url":"https:\/\/voomisupply.com\/products\/accupro-12277019-square-end-mill-0-01in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}