{"product_id":"accupro-12276784-square-end-mill-0-007in-4-flute-carbide","title":"Accupro 12276784 Square End Mill 0.007in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ACCUPRO 12276784 is a solid carbide square end mill designed for precise milling operations in demanding machining environments. With a 0.007-inch cutting diameter and a 0.021-inch length of cut, this tool is built for micro-machining applications where tight tolerances and fine detail are required. The four-flute configuration promotes efficient chip evacuation while maintaining rigidity in the cut. Constructed from micrograin solid carbide, it delivers the hardness and wear resistance needed for high-speed work in ferrous and non-ferrous materials. The bright uncoated finish suits applications where coating adhesion or contamination is a concern.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for precision machining in tool-and-die, mold making, medical device manufacturing, and electronics fabrication. Its micro diameter makes it appropriate for engraving, slotting, and contouring fine features in small workpieces. The 1\/8-inch shank diameter allows it to seat in standard collet chucks or micro tool holders found on CNC machining centers and high-speed spindles. Right-hand cutting and right-hand flute direction are standard for conventional CNC milling setups. Single-end configuration means the tool is replaced rather than flipped when worn.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.007-inch cutting diameter for micro-scale milling and fine detail work\u003c\/li\u003e\n  \u003cli\u003eMicrograin solid carbide construction for hardness, rigidity, and extended tool life\u003c\/li\u003e\n  \u003cli\u003eFour flutes with 30-degree right-hand spiral for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting capable — supports plunge entry into workpiece material\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish for compatibility with a wide range of materials\u003c\/li\u003e\n  \u003cli\u003e1\/8-inch shank diameter fits standard collet chucks and micro tool holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC machining centers and high-speed spindles accepting a 1\/8-inch shank diameter collet or tool holder. Suitable for right-hand cutting applications in standard vertical and horizontal milling setups.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully powered down and the machine is in a safe state before changing tooling. Seat the shank fully into the collet to the recommended engagement depth and torque the collet nut according to the tool holder manufacturer specifications. At micro diameters, runout control is critical — verify TIR with a test indicator before commencing a production cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.007 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.021 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide (Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Configuration\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: +0.0000 \/ -0.0010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: -0.0001 \/ -0.0003 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ACCUPRO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12276784\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACCUPRO","offers":[{"title":"Default Title","offer_id":51727101067570,"sku":"12276784","price":42.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/66f4302d0eec2e8d85be8ac26dd70dcc.jpg?v=1788673329","url":"https:\/\/voomisupply.com\/products\/accupro-12276784-square-end-mill-0-007in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}